Hello,
I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my
ups.conf follows :
[myups]
driver = bcmxcp_usb
port = auto
desc = "Eaton PW 5110 (1500VA)"
My first attempt to run upsdrvctl ended up complaining about unimplemented
usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following
patch :
http://old.nabble.com/Openbsd-and-libusb-td21558254.html
Second attempt:
r...@fox /home/mandas/nut-2.4.1 # USB_DEBUG=3 bcmxcp_usb -DDD -a myups
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB communication subdriver 0.17
debug level is '3'
usb_set_debug: Setting debugging level to 3 (on)
usb_os_find_busses: Found /dev/usb0
usb_os_find_busses: Found /dev/usb1
usb_os_find_busses: Found /dev/usb2
usb_os_find_devices: Found /dev/ugen0 on /dev/usb2
usb_control_msg: 128 6 512 0 0xcfbf7558 8 1000
usb_control_msg: 128 6 512 0 0x7f374500 34 1000
skipped 1 class/vendor specific interface descriptors
usb_control_msg: 0 7 772 0 0xcfbf7490 4 1000
USB error: error reading from interrupt endpoint /dev/ugen0.01: Resource
temporarily unavailable
Communications with UPS lost: Receive error (Request command): COMMAND: 31
RECONNECT USB DEVICE
r...@fox /home/mandas/nut-2.4.1 # USB_DEBUG=3 drivers/bcmxcp_usb -DDD -a
myups
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.1)
USB communication subdriver 0.18
0.000000 debug level is '3'
usb_set_debug: Setting debugging level to 3 (on)
usb_os_find_busses: Found /dev/usb0
usb_os_find_busses: Found /dev/usb1
usb_os_find_busses: Found /dev/usb2
usb_os_find_devices: Found /dev/ugen0 on /dev/usb2
usb_control_msg: 128 6 512 0 0xcfbcadc8 8 1000
usb_control_msg: 128 6 512 0 0x82cbc240 34 1000
skipped 1 class/vendor specific interface descriptors
0.019716 device /dev/ugen0 opened successfully
usb_control_msg: 0 7 772 0 0xcfbcacd0 4 1000
0.024370 entering get_answer(31)
USB error: error reading from interrupt endpoint /dev/ugen0.01: Resource
temporarily unavailable
usb_control_msg: 0 7 772 0 0xcfbcacd0 4 1000
0.029368 entering get_answer(31)
USB error: error reading from interrupt endpoint /dev/ugen0.01: Resource
temporarily unavailable
usb_control_msg: 0 7 772 0 0xcfbcacd0 4 1000
0.032365 entering get_answer(31)
0.032736 get_answer: (8 bytes) => ab 01 79 01 02 50 00 10
0.033027 get_answer: block_number = 1
0.033341 get_answer: data length = 121
0.033680 get_answer: need to read 118 more data
USB error: error reading from interrupt endpoint /dev/ugen0.01: Resource
temporarily unavailable
usb_control_msg: 0 7 772 0 0xcfbcacd0 4 1000
0.038364 entering get_answer(31)
USB error: error reading from interrupt endpoint /dev/ugen0.01: Resource
temporarily unavailable
usb_control_msg: 0 7 772 0 0xcfbcacd0 4 1000
0.042364 entering get_answer(31)
USB error: error reading from interrupt endpoint /dev/ugen0.01: Resource
temporarily unavailable
0.044364 Communications with UPS lost: Error executing command
0.044816 Could not communicate with the ups: Resource temporarily
unavailable
0.045230 CLOSING
usb_os_close: closing endpoint 5
Connecting the UPS to a linux box running nut 2.4.1 + gentoo works however.
I found after searching a similar thread on Jan 2009 but no one posted a
solution if there were any.
Any help would be appreciated
Thanks
D.
--
PGP key 39A40276 at wwwkeys.eu.pgp.net
key fingeprint: 9A0B 61C6 B826 4B73 69BB 972B C5E7 A153 39A4 0276
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
