Hi all,
Have been using Nut on Linux for over ten years now and find it
brilliant. Thanks.
Just upgraded to 2.4.2 and have the 5 or 6 models of UPS's that we use
(apcsmart, megatec, mge-shut, surgemax, digitus) all working including
the MGE Pulsar Evolution 1100 on a USB connection using the usbhid-ups
driver. Running on SLES9. Old but we still have a few servers out
there running this.
The only problem I have noted is a syslog entry that gets posted
constantly when working with the USB connections MGE...
Feb 21 12:05:30 g540-sles usbhid-ups[20918]: libusb_get_interrupt: error
sending control message: Operation not permitted
Feb 21 12:05:35 g540-sles last message repeated 8 times
Feb 21 12:06:35 g540-sles last message repeated 15 times
Feb 21 12:06:47 g540-sles last message repeated 3 times
If I run usbhid-ups, upsd and upsmon as the root user, I get...
Feb 21 12:55:02 g540-sles usbhid-ups[15701]: libusb_get_interrupt: No error
Feb 21 12:55:34 g540-sles last message repeated 8 times
Feb 21 12:55:50 g540-sles last message repeated 4 times
If I use pollonly=1 in the ups.conf no errors at all, and all works. I
haven't tried the pollonly option on the RS232 models.
So, I am assuming I do have a permissions error with udev and am slowing
working my way through that, but struggling.
Are these syslog messages important? Should they be logging if there is
no error?
Is pollonly OK to use for everyday use?
Thanks,
Stephen.
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
