Debain (Linux) kernel (2.6.24) I am using NUT(network ups tools) ver. 2.2.2 to monitor my ns1200(model bn1250g)
I disconnect power and use the command to force shutdown "critical bat", upsmon -c fsd, and this is what I receive. The outcome is the same if I wait for the battery to drain.(have tried on 3 ups, same model) 0 seconds "low bat" (upsmon -c fsd) 5 seconds shutdown started 20 seconds system halts & power down 112 ups lcd and master plug power down, 3buttons stay lit 145 ups 3 buttons turn off 155 I restore ac power " plug into wall" 205 I power on my pc(my system won't boot on AC loss, proxmox2 does) 253 receive logon screen no problems problems 0 seconds "low bat" (upsmon -c fsd) 5 seconds shutdown started 10 I restore AC power "plug into wall" Ac power can be restored at any time from here to just before the leds in the 3 buttons go out and produce the same outcome, 145 seconds above 20 seconds system halts & power down 112 ups lcd and master plug power down, 3 buttons stay lit. 115 ups lcd and master plug power up, online status on lcd. (the time I power up the system can vary but the time between system power up and ups "on bat"& power down is the same "on bat at compact screen every time") 128 I power up the system "power button" 135 ups goes "on bat", system is at compact bios screen. 251 ups lcd and master plug power down, 3 buttons stay lit. 255 ups lcd and master plug power up, online status on lcd. I have tried removing the usb cable when the pc shuts down, after power fail, and plugging it back in when after the ups and pc have been on for about 15-20 minutes, and the ups goes into its shutdown sequence as soon as I plug the usb cable back in.
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
