On Fri, Jul 02, 2010 at 10:32:54AM +0200, Arnaud Quette wrote: > Hi, > > first of all, 2.2 releases are too old. If possible, try to update to a more > recent version. > that being said, the calibration code was already present in 2.2.0
I will, when it looks like this is going to work. (I use the distro version at the moment (RHEL 5)) > I came to the same conclusion: the matching code is present. > so I need the answer to the above #4, along with an upsc output and the > driver's debug output: > /path/to/snmp-ups -?? -a <upsname> Here it is: h...@swizzy:~-$ upsc testups ambient.humidity.alarm.maximum: 60.0 ambient.humidity.alarm.minimum: 30.0 ambient.temperature.alarm.maximum: 40.0 ambient.temperature.alarm.minimum: 10.0 battery.charge: 100.0 battery.charge.restart: 0 battery.current: 0.0 battery.date: 11/27/09 battery.packs: 1.0 battery.packs.bad: 0.0 battery.runtime: 11220.0 battery.runtime.low: 120 battery.voltage: 55.0 battery.voltage.nominal: 0.0 driver.name: snmp-ups driver.parameter.mibs: apcc driver.parameter.pollfreq: 15 driver.parameter.pollinterval: 2 driver.parameter.port: ups-wisk-stage-001.net.uu.nl driver.parameter.snmp_version: v1 driver.version: 2.2.0- driver.version.internal: 0.42 (mib: apcc 1.1) input.frequency: 50.0 input.sensitivity: high input.transfer.high: 253 input.transfer.low: 208 input.voltage: 230.0 output.current: 1.0 output.frequency: 50.0 output.voltage: 228.0 output.voltage.nominal: 230 ups.delay.shutdown: 630 ups.delay.start: 420 ups.firmware: 690.19.I ups.id: UPS_IDEN ups.load: 11.0 ups.mfr: APC ups.mfr.date: 11/17/09 ups.model: Smart-UPS 2200 XL ups.serial: JS0947005447 ups.status: OL ups.temperature: 21.0 ups.test.result: Ok h...@swizzy:~-$ h...@swizzy:~-$ snmpset -v 1 -On -c *** ups-wisk-stage-001.net.uu.nl .1.3.6.1.4.1.318.1.1.1.7.2.5.0 i 2 .1.3.6.1.4.1.318.1.1.1.7.2.5.0 = INTEGER: performCalibration(2) h...@swizzy:~-$ snmpwalk -v 2c -On -c *** ups-wisk-stage-001.net.uu.nl .1.3.6.1.4.1.318.1.1.1.7 .1.3.6.1.4.1.318.1.1.1.7.2.1.0 = INTEGER: biweekly(2) .1.3.6.1.4.1.318.1.1.1.7.2.2.0 = INTEGER: noTestDiagnostics(1) .1.3.6.1.4.1.318.1.1.1.7.2.3.0 = INTEGER: ok(1) .1.3.6.1.4.1.318.1.1.1.7.2.4.0 = STRING: "06/22/2010" .1.3.6.1.4.1.318.1.1.1.7.2.5.0 = INTEGER: noPerformCalibration(1) .1.3.6.1.4.1.318.1.1.1.7.2.6.0 = INTEGER: calibrationInProgress(3) .1.3.6.1.4.1.318.1.1.1.7.2.7.0 = STRING: "07/02/2010" h...@swizzy:~-$ snmpset -v 1 -On -c *** ups-wisk-stage-001.net.uu.nl .1.3.6.1.4.1.318.1.1.1.7.2.5.0 i 3 .1.3.6.1.4.1.318.1.1.1.7.2.5.0 = INTEGER: cancelCurrentCalibration(3) h...@swizzy:~-$ r...@swizzy:/etc/ups-# /sbin/snmp-ups -a testups Network UPS Tools - Multi-MIBS SNMP UPS driver 0.42 (2.2.0-) Warning: This is an experimental driver. Some features may not function correctly. Detected Smart-UPS 2200 XL on host ups-wisk-stage-001.net.uu.nl (mib: apcc 1.1) [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.2.1.2.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.3.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.3.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.3.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.4.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.4.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.4.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.5.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.2.3.1.5.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] Warning: excessive poll failures, limiting error reporting [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.2.1.2.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.2.1.4.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.3.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.3.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.3.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.4.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.4.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.4.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.5.1.1.1: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.5.1.1.2: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.1.9.3.3.1.5.1.1.3: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] Warning: excessive poll failures, limiting error reporting [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.2.1.1.0: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.2.1.2.0: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.10.2.3.2.1.4.0: Error in packet: (noSuchName) There is no such variable name in this MIB. [testups] nut_snmp_get: .1.3.6.1.4.1.318.1.1.10.2.3.2.1.6.0: Error in packet: (noSuchName) There is no such variable name in this MIB. r...@swizzy:/etc/ups-# So this seems to be the problem part. ups.conf has: [testups] driver = snmp-ups port = ups-wisk-stage-001.net.uu.nl community = *** snmp_version = v1 mibs = apcc pollfreq = 15 Cheers, -- +----------------------------------------------------------------------+ | (o- Henk van Lingen Utrecht, The Netherlands | | /\ http://henk.vanlingen.net/ | | v_/_ http://www.tuxtown.net/netiquette/ | + Using Outlook ? -> http://home.in.tum.de/~jain/software/oe-quotefix/ + _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
