Citeren Brother Railgun of Reason <[email protected]>:
./configure --prefix=/opt/nut --with-gnu-ld --with-serial --without-usb --with-cgi --with-gd-includes=-I/usr/local/include --with-gd-libs="-L/usr/local/lib -R/usr/local/lib -lgd" --with-user=nut --with-group=nut --host=i686-pc-solaris2.10 --build=i686-pc-solaris2.10 --target=i686-pc-solaris2.10
Unless you're using a really ancient version of GD, the installation path should be detected automatically.
Oh, footnote to that: I specified the host triple because although the correct triple for this system is actually i686-pc-solaris2.10, nut configuration was incorrectly detecting it as i386-pc-solaris2.10. This is probably Solaris 10's fault, as even though this is a dual 32/64-bit Solaris 10 install on x86_64 hardware (P4 Xeons, Nocona architecture), Solaris insists on reporting uname -p as i386 rather than i686 or amd64.
I fail to see the relevance of the above. NUT doesn't use these values and as far as I know, building for i386 or i686 isn't much of a difference since both will be 32-bit architectures.
If you want to build for a 64-bit architecture, it should be something like x86_64 or amd64, but I apparently this isn't the case here. The 'config.log' might be helpful in finding out what is really going on.
Best regards, Arjen -- Please keep list traffic on the list (off-list replies will be rejected) _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
