Hi Arjen, >Citeren Glen Ogilvie <[email protected]>:
>> Has anyone had success with the Dynamix 650VA, that uses the USB cable? >Not that I know of. >> I can't get megatec_usb to recognize it, I have tried both stable and >> development versions. > What makes you think the megatec_usb driver should support this? Does > it have a serial port as well that works with the megatec driver? If > so, you could try the blazer_usb driver. If not, posting the output of > 'lsusb -vvv' might give us a clue which one does (if any). Thank you for your offer of some help. I've tried to get some information to help with figuring out the problem. I thought it might work with megatec_usb because the serial version of the USP works with the megatec according to the compatibility page: http://www.networkupstools.org/compat/stable.html I've tried blazer_usb as well, but it also does not seem to recognize it. I've tried megatec_usb in debug mode, output below: Device Status: 0x0000 2.487823 Checking device (0001/0000) (001/002) 2.495183 - VendorID: 0001 2.495214 - ProductID: 0000 2.495221 - Manufacturer: unknown 2.495229 - Product: unknown 2.495236 - Serial Number: unknown 2.495243 - Bus: 001 2.495249 Trying to match device 2.495262 Device matches 2.498198 Successfully reconnected 2.798518 Q1 => FAILED [timeout] 2.798570 Asking for UPS status [Q1]... 2.798582 set_data_krauler: index [03] 2.802638 libusb_get_string: Broken pipe 2.802677 set_data_krauler: connection failure 2.802687 ser_send_pace: Device detached? (error -32: Broken pipe) 2.802695 ================================================== 2.802702 = device has been disconnected, try to reconnect = 2.802709 ================================================== 2.803983 Checking device (1D6B/0001) (001/001) 2.804223 - VendorID: 1d6b 2.804235 - ProductID: 0001 2.804242 - Manufacturer: Linux 2.6.33.7-server-1mnb uhci_hcd 2.804249 - Product: UHCI Host Controller 2.804256 - Serial Number: 0000:02:00.0 2.804294 - Bus: 001 2.804304 Trying to match device 2.804311 Device does not match - skipping 2.804319 Checking device (0001/0000) (001/002) 2.810482 - VendorID: 0001 2.810518 - ProductID: 0000 2.810524 - Manufacturer: unknown 2.810532 - Product: unknown 2.810539 - Serial Number: unknown 2.810546 - Bus: 001 2.810552 Trying to match device 2.810564 Device matches 2.814006 Successfully reconnected 3.114667 Q1 => FAILED [timeout] 3.114720 Megatec protocol UPS not detected. (Bus Powered) Also, below is the output of lsusb. Bus 001 Device 002: ID 0001:0000 Fry's Electronics Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0001 Fry's Electronics idProduct 0x0000 bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 624 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) Regards Glen Ogilvie _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
