Citeren Glen Ogilvie <[email protected]>:
I've attached the output of lsusb -v and usbhid-ups -DDD -a ups -x vendorid=0001 -x productid=0000 -x explore
Although the output of 'usbhid-ups' shows something which vaguely looks like a report descriptor, I don't think it is valid/used. Most likely, this is either a 'krauler' type megatec implementation, or some other proprietary USB to serial implementation. You could try if the blazer_usb driver is able to come up with some useful debugging output (see 'man 8 blazer'). You may wish to override the default subdriver to see if that makes any difference.
Advise on where to start with getting these working would be helpful. I could capture the USB communication with a windows machine if that is useful.
The best thing to do, would be to trade these units in (see also the reply from James Walker) and buy a UPS that offers better support. The fact that the vendor was too cheap to use a real USB vendorid/productid speaks volumes about these devices. You should be able to find supported devices for (far) less than US$ 100 a piece nowadays.
Best regards, Arjen -- Please keep list traffic on the list (off-list replies will be rejected) _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
