Hi, In article <[email protected]>, Charles Lepple<[email protected]> wrote: > What does NUT show when you run "upscmd -l <name-of-ups>"?
andy-pc:~# upscmd -l apc Instant commands supported on UPS [apc]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) shutdown.reboot - Shut down the load briefly while rebooting the UPS shutdown.stop - Stop a shutdown in progress test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test test.panel.start - Start testing the UPS panel test.panel.stop - Stop a UPS panel test > Also, what is the exact version of NUT that you are running? andy-pc:~# upsd --version Network UPS Tools upsd 2.4.3 It was installed from Debian's testing, which names it as nut_2.4.3-1+b1_i386.deb Thanks for any help you can offer. Andy _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
