On 24 Jan 2011, at 14:18, Charles Lepple wrote: > On Jan 23, 2011, at 2:16 PM, Paul Banks wrote: > >> $ ./blazer_usb -a rupert -DDDDD -u root > > ^ If this is in a non-root shell, this won't work.
Charles, thanks for clarifying. As I mentioned I was initially working in a root shel but came up against errors I couldn't find any reference to anywhere. It was only whilst composing my post here that I thought to try it as a non-root user in case that had been an assumed step in any instructions I'd followed. OK, so disregarding the permissions (which I can assume if not fine are at least a separate issue), can anyone make any recommendations about where I should go from here: (note root shell) # ./blazer_usb -DDDDD -a rupert -u root Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.0) 0.000000 send_to_all: SETINFO driver.parameter.port "auto" 0.003137 debug level is '5' 0.023508 Checking device (0001/0000) (003/006) 0.030542 - VendorID: 0001 0.032742 - ProductID: 0000 0.035366 - Manufacturer: ATCL FOR UPS 0.037801 - Product: ATCL FOR UPS 0.040178 - Serial Number: ATCL FOR UPS 0.042693 - Bus: 003 0.045032 Trying to match device 0.047385 Device matches 0.065112 send_to_all: SETINFO ups.vendorid "0001" 0.067529 send_to_all: SETINFO ups.productid "0000" 0.070556 send_to_all: SETINFO device.type "ups" 0.072796 send_to_all: SETINFO driver.version "2.6.0" 0.075564 send_to_all: SETINFO driver.version.internal "0.03" 0.078335 send_to_all: SETINFO driver.name "blazer_usb" 0.081055 Trying megatec protocol... 0.083423 send: Q1 0.087710 read: error sending control message: Broken pipe 0.091693 Stall condition cleared 0.094179 blazer_status: short reply 0.096664 Status read 1 failed 0.099547 send: Q1 0.103623 read: error sending control message: Broken pipe 0.106326 Stall condition cleared 0.108771 blazer_status: short reply 0.111610 Status read 2 failed 0.114070 send: Q1 0.118025 read: error sending control message: Broken pipe 0.121712 Stall condition cleared 0.124013 blazer_status: short reply 0.126304 Status read 3 failed 0.128969 Trying mustek protocol... 0.131854 send: QS 0.134344 read: QS 0.136835 blazer_status: short reply 0.139482 Status read 1 failed 0.141970 send: QS 0.144155 read: QS 0.146496 blazer_status: short reply 0.148775 Status read 2 failed 0.151226 send: QS 0.153406 read: QS 0.155615 blazer_status: short reply 0.158165 Status read 3 failed 0.160564 Trying megatec/old protocol... 0.162959 send: D 0.164992 read: D 0.167053 blazer_status: short reply 0.168869 Status read 1 failed 0.171206 send: D 0.173712 read: D 0.176037 blazer_status: short reply 0.178380 Status read 2 failed 0.180818 send: D 0.183006 read: D 0.185347 blazer_status: short reply 0.187743 Status read 3 failed 0.190084 No supported UPS detected Help is much appreciated! _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
