On Sun, Mar 6, 2011 at 6:50 AM, Charles Lepple <[email protected]> wrote:
> If an option to a driver such as usbhid-ups is not documented in its own > man page, there is another man page (nutupsdrv) for options common to all > the drivers. > > http://www.networkupstools.org/docs/man/nutupsdrv.html > > So you can just add "productid=2010" to ups.conf. > > From the patch above, it looks like the 900U reports voltages that are ten > times lower than actual. Running "upsc Tripp-Lite" should confirm this. That > should be fixed in NUT 2.6.0 and later (where you would not need the extra > "productid" option, either). > > -- > Charles Lepple > Thanks. I can confirm that both of the proposed solutions work. (I hadn't realized that there was a newer version than 2.4.3; I guess my distro is behind the curve.) Either adding productid=2010 to ups.conf or upgrading to 2.6.0 seems to bring joy. With 2.6.0, I get: # upsc Tripp-Lite@localhost battery.charge: 100 battery.runtime: 1305 battery.type: PbAC battery.voltage: 13.5 battery.voltage.nominal: 12.0 device.mfr: Tripp Lite device.model: Tripp Lite UPS device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.0 driver.version.data: TrippLite HID 0.6 driver.version.internal: 0.35 input.frequency: 59.8 input.voltage: 119.0 input.voltage.nominal: 120 output.frequency.nominal: 60 output.voltage.nominal: 120 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.mfr: Tripp Lite ups.model: Tripp Lite UPS ups.power.nominal: 900 ups.productid: 2010 ups.status: OL ups.timer.reboot: 65535 ups.timer.shutdown: 65535 ups.vendorid: 09ae ups.watchdog.status: 0 That all looks reasonable to me. Thanks, Doug
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
