Hello,
I have just installed nut_2.6.0 from Debian testing, do anyone know the
correct driver for this ups? The blazer_usb don't report
battery-charge, the bundled software report charge and runtime.
root@pluto<~>upsc powerwalker
battery.voltage: 40.86
battery.voltage.nominal: 36.0
beeper.status: enabled
device.mfr:
device.model: HV 1K
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/bus/usb/007/002
driver.version: 2.6.0
driver.version.internal: 0.03
input.current.nominal: 4.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 227.4
input.voltage.fault: 227.2
input.voltage.nominal: 220
output.voltage: 227.5
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 00001907
ups.load: 15
ups.mfr:
ups.model: HV 1K
ups.productid: 5161
ups.status: OL BYPASS
ups.temperature: 20.5
ups.type: online
ups.vendorid: 0665
etwork UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.0)
0.000000 send_to_all: SETINFO driver.parameter.port
"/dev/bus/usb/007/002"
0.000041 debug level is '5'
0.305688 Checking device (1D6B/0002) (008/001)
0.305749 - VendorID: 1d6b
0.305756 - ProductID: 0002
0.305761 - Manufacturer: unknown
0.305765 - Product: unknown
0.305768 - Serial Number: unknown
0.305774 - Bus: 008
0.305778 Trying to match device
0.305782 Device does not match - skipping
0.305789 Checking device (067B/2303) (007/003)
0.305806 - VendorID: 067b
0.305810 - ProductID: 2303
0.305814 - Manufacturer: unknown
0.305818 - Product: unknown
0.305822 - Serial Number: unknown
0.305826 - Bus: 007
0.305829 Trying to match device
0.305833 Device does not match - skipping
0.305838 Checking device (0665/5161) (007/002)
0.325547 - VendorID: 0665
0.325562 - ProductID: 5161
0.325571 - Manufacturer: unknown
0.325580 - Product: unknown
0.325588 - Serial Number: unknown
0.325595 - Bus: 007
0.325603 Trying to match device
0.325614 Device matches
0.328556 send_to_all: SETINFO ups.vendorid "0665"
0.328574 send_to_all: SETINFO ups.productid "5161"
0.328594 send_to_all: SETINFO device.type "ups"
0.328608 send_to_all: SETINFO driver.version "2.6.0"
0.328621 send_to_all: SETINFO driver.version.internal "0.03"
0.328636 send_to_all: SETINFO driver.name "blazer_usb"
0.328649 Trying megatec protocol...
0.332547 send: Q1
0.564555 read: (227.4 227.4 227.4 012 50.0 2.27 20.5 00100001
0.564598 send_to_all: SETINFO input.voltage "227.4"
0.564618 send_to_all: SETINFO input.voltage.fault "227.4"
0.564635 send_to_all: SETINFO output.voltage "227.4"
0.564662 send_to_all: SETINFO ups.load "12"
0.564670 send_to_all: SETINFO input.frequency "50.0"
0.564677 send_to_all: SETINFO battery.voltage "2.27"
0.564683 send_to_all: SETINFO ups.temperature "20.5"
0.564688 send_to_all: SETINFO beeper.status "enabled"
0.564693 send_to_all: SETINFO ups.type "online"
0.564701 send_to_all: SETINFO ups.status "OL BYPASS"
0.564705 Status read in 1 tries
0.564709 Supported UPS detected with megatec protocol
0.568553 send: F
0.684557 read: #220.0 004 036.0 50.0
0.684582 send_to_all: SETINFO input.voltage.nominal "220"
0.684599 send_to_all: SETINFO input.current.nominal "4.0"
0.684617 send_to_all: SETINFO battery.voltage.nominal "36.0"
0.684633 send_to_all: SETINFO input.frequency.nominal "50"
0.684645 Ratings read in 1 tries
0.688555 send: I
0.876557 read: # HV 1K 00001907
0.876611 send_to_all: SETINFO ups.mfr ""
0.876658 send_to_all: SETINFO ups.model "HV 1K"
0.876680 send_to_all: SETINFO ups.firmware "00001907"
0.876699 Vendor information read in 1 tries
0.876744 Battery runtime will not be calculated (runtimecal not set)
0.876766 send_to_all: SETINFO ups.delay.start "180"
0.876787 send_to_all: SETINFO ups.delay.shutdown "30"
0.876806 send_to_all: ADDCMD beeper.toggle
0.876826 send_to_all: ADDCMD load.off
0.876872 send_to_all: ADDCMD load.on
0.876893 send_to_all: ADDCMD shutdown.return
0.876912 send_to_all: ADDCMD shutdown.stayoff
0.876932 send_to_all: ADDCMD shutdown.stop
0.876952 send_to_all: ADDCMD test.battery.start
0.876971 send_to_all: ADDCMD test.battery.start.deep
0.877018 send_to_all: ADDCMD test.battery.start.quick
0.877039 send_to_all: ADDCMD test.battery.stop
0.880555 send: Q1
1.124557 read: (226.3 227.4 227.3 014 50.0 2.28 20.5 00100001
1.124617 send_to_all: SETINFO input.voltage "226.3"
1.124665 send_to_all: SETINFO output.voltage "227.3"
1.124688 send_to_all: SETINFO ups.load "14"
1.124713 send_to_all: SETINFO battery.voltage "41.04"
1.124767 send_to_all: DATAOK
1.124843 dstate_init: sock /var/run/nut/blazer_usb-powerwalker
open on fd 5
1.124867 send_to_all: SETINFO driver.parameter.pollinterval "2"
1.124888 send_to_all: SETINFO device.mfr ""
1.124910 send_to_all: SETINFO device.model "HV 1K"
1.128561 send: Q1
1.364561 read: (227.2 227.2 227.2 013 50.0 2.28 20.5 00100001
1.364618 send_to_all: SETINFO input.voltage "227.2"
1.364666 send_to_all: SETINFO input.voltage.fault "227.2"
1.364689 send_to_all: SETINFO output.voltage "227.2"
1.364712 send_to_all: SETINFO ups.load "13"
3.129591 send: Q1
3.356592 read: (227.8 227.5 227.4 014 50.0 2.27 20.5 00100001
3.356621 send_to_all: SETINFO input.voltage "227.8"
3.356640 send_to_all: SETINFO input.voltage.fault "227.5"
3.356657 send_to_all: SETINFO output.voltage "227.4"
3.356676 send_to_all: SETINFO ups.load "14"
3.356697 send_to_all: SETINFO battery.voltage "40.86"
5.129627 send: Q1
5.356620 read: (227.3 227.3 227.3 013 50.0 2.27 20.5 00100001
5.356683 send_to_all: SETINFO input.voltage "227.3"
5.356728 send_to_all: SETINFO input.voltage.fault "227.3"
5.356751 send_to_all: SETINFO output.voltage "227.3"
5.356775 send_to_all: SETINFO ups.load "13"
7.129651 send: Q1
7.356650 read: (227.3 227.2 226.3 014 50.0 2.27 20.5 00100001
7.356718 send_to_all: SETINFO input.voltage.fault "227.2"
7.356761 send_to_all: SETINFO output.voltage "226.3"
7.356784 send_to_all: SETINFO ups.load "14"
9.128676 send: Q1
9.364680 read: (227.7 228.1 228.2 013 50.0 2.28 20.5 00100001
9.364714 send_to_all: SETINFO input.voltage "227.7"
9.364733 send_to_all: SETINFO input.voltage.fault "228.1"
9.364751 send_to_all: SETINFO output.voltage "228.2"
9.364770 send_to_all: SETINFO ups.load "13"
9.364788 send_to_all: SETINFO battery.voltage "41.04"
I also have a Konig CMP1200, on blazer_ser, it dosent report charge or
runtime either.
root@pluto<~>upsc konig
battery.voltage: 27.10
battery.voltage.nominal: 23.5
beeper.status: disabled
device.mfr: KONIG COMPUTER
device.model: CMP1200
device.type: ups
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyD0
driver.version: 2.6.0
driver.version.internal: 1.51
input.current.nominal: 6.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 226.0
input.voltage.fault: 165.0
input.voltage.nominal: 220
output.voltage: 226.0
ups.alarm: Shutdown imminent!
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: VER4.00C
ups.load: 0
ups.mfr: KONIG COMPUTER
ups.model: CMP1200
ups.status: ALARM OL
ups.temperature: 0.0
ups.type: offline / line interactive
Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.0)
0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyD0"
0.000059 debug level is '5'
0.100545 send_to_all: SETINFO device.type "ups"
0.100601 send_to_all: SETINFO driver.version "2.6.0"
0.100645 send_to_all: SETINFO driver.version.internal "1.51"
0.100666 send_to_all: SETINFO driver.name "blazer_ser"
0.100686 Trying megatec protocol...
0.100747 send: Q1
0.349886 read: (226.0 165.0 226.0 000 50.0 27.1 00.0 00001010
0.349960 send_to_all: SETINFO input.voltage "226.0"
0.349985 send_to_all: SETINFO input.voltage.fault "165.0"
0.350007 send_to_all: SETINFO output.voltage "226.0"
0.350039 send_to_all: SETINFO ups.load "0"
0.350090 send_to_all: SETINFO input.frequency "50.0"
0.350116 send_to_all: SETINFO battery.voltage "27.10"
0.350138 send_to_all: SETINFO ups.temperature "0.0"
0.350158 send_to_all: SETINFO beeper.status "disabled"
0.350179 send_to_all: SETINFO ups.type "offline / line interactive"
0.350232 send_to_all: SETINFO ups.alarm "Shutdown imminent!"
0.350254 send_to_all: SETINFO ups.status "ALARM OL"
0.350274 Status read in 1 tries
0.350292 Supported UPS detected with megatec protocol
0.350315 send: F
0.481871 read: #220.0 006 23.50 50.0
0.481924 send_to_all: SETINFO input.voltage.nominal "220"
0.481967 send_to_all: SETINFO input.current.nominal "6.0"
0.481990 send_to_all: SETINFO battery.voltage.nominal "23.5"
0.482013 send_to_all: SETINFO input.frequency.nominal "50"
0.482058 Ratings read in 1 tries
0.482082 send: I
0.693878 read: #KONIG COMPUTER CMP1200 VER4.00C
0.693930 send_to_all: SETINFO ups.mfr "KONIG COMPUTER"
0.693970 send_to_all: SETINFO ups.model "CMP1200"
0.693992 send_to_all: SETINFO ups.firmware "VER4.00C"
0.694011 Vendor information read in 1 tries
0.694056 Battery runtime will not be calculated (runtimecal not set)
0.694078 send_to_all: SETINFO ups.delay.start "180"
0.694099 send_to_all: SETINFO ups.delay.shutdown "30"
0.694119 send_to_all: ADDCMD beeper.toggle
0.694139 send_to_all: ADDCMD load.off
0.694183 send_to_all: ADDCMD load.on
0.694204 send_to_all: ADDCMD shutdown.return
0.694223 send_to_all: ADDCMD shutdown.stayoff
0.694243 send_to_all: ADDCMD shutdown.stop
0.694262 send_to_all: ADDCMD test.battery.start
0.694282 send_to_all: ADDCMD test.battery.start.deep
0.694328 send_to_all: ADDCMD test.battery.start.quick
0.694349 send_to_all: ADDCMD test.battery.stop
0.694378 send: Q1
0.925881 read: (223.0 165.0 223.0 000 50.0 27.1 00.0 00001010
0.925935 send_to_all: SETINFO input.voltage "223.0"
0.925974 send_to_all: SETINFO output.voltage "223.0"
0.926004 send_to_all: DATAOK
0.926068 dstate_init: sock /var/run/nut/blazer_ser-konig open on
fd 5
0.926119 send_to_all: SETINFO driver.parameter.pollinterval "2"
0.926142 send_to_all: SETINFO device.mfr "KONIG COMPUTER"
0.926163 send_to_all: SETINFO device.model "CMP1200"
0.926194 send: Q1
1.165917 read: (223.0 165.0 223.0 000 50.0 27.1 00.0 00001010
2.929872 send: Q1
3.165880 read: (226.0 165.0 226.0 000 50.0 27.1 00.0 00001010
3.165936 send_to_all: SETINFO input.voltage "226.0"
3.165975 send_to_all: SETINFO output.voltage "226.0"
4.929879 send: Q1
5.165882 read: (226.0 165.0 226.0 000 50.2 27.1 00.0 00001010
5.165952 send_to_all: SETINFO input.frequency "50.2"
6.929878 send: Q1
7.165881 read: (223.0 165.0 223.0 000 50.0 27.1 00.0 00001010
7.165937 send_to_all: SETINFO input.voltage "223.0"
7.165975 send_to_all: SETINFO output.voltage "223.0"
7.165999 send_to_all: SETINFO input.frequency "50.0"
8.929892 send: Q1
9.165883 read: (226.0 165.0 226.0 000 50.0 27.1 00.0 00001010
9.165942 send_to_all: SETINFO input.voltage "226.0"
9.165978 send_to_all: SETINFO output.voltage "226.0"
10.929875 send: Q1
11.165879 read: (220.0 165.0 220.0 000 50.0 27.1 00.0 00001010
11.165936 send_to_all: SETINFO input.voltage "220.0"
11.165975 send_to_all: SETINFO output.voltage "220.0"
12.929869 send: Q1
13.165882 read: (220.0 165.0 220.0 000 50.0 27.1 00.0 00001010
Regards Espen
--
Gratis e-post fra Monsterpost.no, sjekk www.monsterpost.no :)
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
