Please keep the list in copy, this could be interesting for other users. On Wed, 2011-06-08 at 18:01 +0300, Павел Гуменюк wrote: > OS version is Windows XP SP3 32-bit. > There wasn't any driver installed in my Device Drivers Panel, so I > follow you tips and install it. > Here is my cmd output: > > C:\Program Files\NUT\bin>bcmxcp_usb.exe -a PW5115 -D > Network UPS Tools - BCMXCP UPS driver 0.23 (2.6.0-2988:2989M) > USB communication subdriver 0.18 > 0.000000 debug level is '1' > 0.015625 device \\.\libusb0-0001--0x06da-0x0002 opened > successfully > 0.015625 Can't claim POWERWARE USB interface: libusb0-dll:err > [claim_inte > rface] could not claim interface 0, invalid configuration 0 >
It's a bug ! I will send you privately a new binary for bcmxcp_usb.exe. Can you try it and report if it fixes the bug please ? > Unable to find POWERWARE UPS device on USB bus (USB) > > Things to try: > > - Connect UPS device to USB bus > > - Run this driver as another user (upsdrvctl -u or 'user=...' in > ups.conf). > See upsdrvctl(8) and ups.conf(5). > > 0.031250 Fatal error: unusable configuration > > C:\Program Files\NUT\sbin>upsd.exe > Network UPS Tools upsd.exe 2.6.0-2988:2989M > listening on 192.168.100.170 port 3493 > ^C > C:\Program Files\NUT\sbin>upsmon.exe > Network UPS Tools upsmon 2.6.0-2988:2989M > UPS: [email protected] (master) (power value 1) > Using power down flag file /etc/killpower > ^C > > Could you tell me what I need to do with SHUTDOWNCMD variable ? If you want your system to be really shutdown when upsmon criteria are completed (e.g. low battery level), you have to use the following command (which can be found in etc/upsmon.conf.sample): SHUTDOWNCMD "C:\\WINDOWS\\system32\\shutdown.exe -s -t 0" You should also change POWERDOWNFLAG : POWERDOWNFLAG "C:\\killpower" > Thank you for answers. > > 2011/6/8 Frédéric Bohé <[email protected]> > > On Wed, 2011-06-08 at 10:24 +0300, Павел Гуменюк wrote: > > Hello. > > I've tried to configure Windows (complete port, Beta): > Windows MSI > > installer 2.6.0-1 with my Powerware 5115 connected via USB > port but > > have no luck. > > Here is my config files: > > > > nut.conf: > > MODE = netserver > > > > ups.conf: > > [PW5115] > > driver = bcmxcp_usb > > port = notUsed > > desc = "PowerWare 5115" > > > > > > upsd.conf: > > LISTEN 192.168.1.12 3493 > > > > > > upsd.users: > > [monuser] > > password = xxxxxxxx > > upsmon master > > > > > > upsmon.conf: > > > > MONITOR [email protected] 1 monuser xxxxxxxx master > > > > MINSUPPLIES 1 > > SHUTDOWNCMD "/sbin/shutdown -h +0" > > NOTIFYCMD /sbin/upssched > > POLLFREQ 5 > > POLLFREQALERT 5 > > HOSTSYNC 15 > > DEADTIME 15 > > POWERDOWNFLAG /etc/killpower > > NOTIFYFLAG ONLINE SYSLOG+WALL+EXEC > > NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC > > NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC > > RBWARNTIME 43200 > > NOCOMMWARNTIME 300 > > FINALDELAY 5 > > > > > > upssched.conf: > > CMDSCRIPT /bin/upssched-cmd > > AT ONBATT * START-TIMER onbattwarn 10 > > AT ONLINE * CANCEL-TIMER onbattwarn > > AT LOWBATT * EXECUTE lowbattwarn > > AT ONBATT * START-TIMER timeshutdown 100 > > AT ONLINE * CANCEL-TIMER timeshutdown > > > > > > There are huge count of windows events such as "upsmon - > Poll UPS > > [[email protected]] failed - Data stale." > > Can anyone help me to get right configs? > > > Hello Pavel, > > I don't see any obvious issue in your configuration (although > you might > consider adapting the SHUTDOWNCMD variable in upsmon.conf for > Windows). > > My first question is : what is your Windows version, and is it > a 32 bits > or 64 bits system ? > > Then, from what I understand, you might have an issue with the > libUSB > driver. Can you make sure you see an entry in the "Device > Manager" > called "libusb-win32 devices". Under this entry you should > have a "NUT > USB driver" sub entry. > > If there is no such entry, please make sure your UPS is > connected to > your host and run "C:\Program Files\NUT\others > \wdi-simple.exe". there > should be a console windows saying it is installing a driver. > > If you see the libusb entry in the "Device Manager", we need > more input. > Please stop NUT from the "Start" menu, then in consoles > windows, run: > C:\Program Files\NUT\bin\bcmxcp_usb.exe -a PW5115 -D > C:\Program Files\NUT\sbin\upsd.exe > C:\Program Files\NUT\sbin\upsmon.exe > > And sent us the resulting logs ! > > Fred > > > Thanks > > _______________________________________________ > > Nut-upsuser mailing list > > [email protected] > > > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser > > -- > Team Open Source Eaton - http://powerquality.eaton.com > > > -------------------------------------------------------------------------- > -- Team Open Source Eaton - http://powerquality.eaton.com -------------------------------------------------------------------------- _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
