Hi Sergey, 2011/7/15 Sergey Talchuk <[email protected]>
> Hi Arnaud, > > both configurations are ok :). Please find the file attached. > logic since the 2nd is automatically guessed from the first using USB Vendor and Product ID ;-) can you please send in upsc, upscmd and upsrw output. and also report the shutdown testing as described here: http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html#Shutdown_design I'll then add this model to the HCL. cheers, Arnaud > thanks, > Sergey > > P.S. Have nice weekend > > > On Wed, Jul 13, 2011 at 6:20 PM, Arnaud Quette <[email protected]>wrote: > >> >> 2011/7/13 Sergey Talchuk <[email protected]> >> >>> Hi Arnaud, >>> >> >> Hi Sergey, >> >> >>> A friend of mine bought an UPS: “POWEREX VI 1000 LED”. >>> http://www.powerexups.aiptek.de/products.html >>> As far as I know he doesn’t want to use NUT for windows, since he is >>> quite happy with the software delivered on the CD :) >>> http://www.power-software-download.com/viewpower.html >>> >>> But I was wondering if NUT can work with the UPS. >>> And it seems “POWEREX VI 1000 LED” can work with ‘blazer_usb’ driver (see >>> below) >>> >>> # lsusb -d 0665:5161 >>> Bus 002 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial >>> >> >> well, though it won't be as good as an Eaton (standard disclaimer ;-), >> this one should indeed be supported by the blazer drivers. >> >> Not fully sure if it's with blazer_usb (cypress subdriver) and port "auto" >> or with blazer and port "/dev/ttyUSB0" though. Try the former first... >> >> please report back on the list so that we can add it to the compat list. >> >> cheers, >> Arnaud >> -- >> Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com >> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ >> Debian Developer - http://www.debian.org >> Free Software Developer - http://arnaud.quette.free.fr/ >> >> >
=== CONFIGURATION Nr.1 ------------------ # driver = blazer_usb # port = auto $ upsc powerex battery.voltage: 27.80 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.0 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 233.6 input.voltage.fault: 233.1 input.voltage.nominal: 220 output.voltage: 233.1 ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 10.0 ups.productid: 5161 ups.status: OL ups.type: offline / line interactive ups.vendorid: 0665 === CONFIGURATION Nr.2 ------------------ # driver = blazer_usb # subdriver = cypress # vendorid = 0665 # productid = 5161 # port = auto $upsc powerex battery.voltage: 27.80 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 5161 driver.parameter.subdriver: cypress driver.parameter.vendorid: 0665 driver.version: 2.6.0 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 233.1 input.voltage.fault: 233.6 input.voltage.nominal: 220 output.voltage: 233.6 ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 10.0 ups.productid: 5161 ups.status: OL ups.type: offline / line interactive ups.vendorid: 0665 $ upscmd -l powerex Instant commands supported on UPS [powerex]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately load.on - Turn on the load immediately shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.battery.start - Start a battery test test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
