Hola Sebastián, first, please keep the NUT list cc'ed!
2011/7/27 Sebastián León del Moral <[email protected]> > Hi Arnaud > > The problem is that the tow ups have the same serial number, vendor, and > product... > > I don´t know i do now > clean solution: buy well designed devices. More expensive, but buying Eaton, for example, means also supporting NUT developments! quick and dirty solution: consider putting each unit on a separate USB bus (as show by lsusb). then use "bus = X" instead of serial (in my previous example) in ups.conf. Once more, the USB drivers manpages will provide you with more details. cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ > El 27/07/2011, a las 14:14, Arnaud Quette escribió: > > > 2011/7/27 Petr Kubánek <[email protected]> > >> Hola, >> >> you will probably need to create two different device entries, using >> udev rules. See >> >> http://rts2.org/wiki/doku.php?id=howto:set_symlinks_for_usb_serial_ports >> >> for details (this is on USB, but should be similar for UPS..you need to >> find something which uniquely identified them - e.g. serial number). >> >> I believe that adding two entries with different name and port to >> ups.conf will deliver what you need. >> > > and the discriminant, as you well noted above: either id, serial, bus, ... > example (with usbhid-ups): > > [ups1] > driver = usbhid-ups > port = auto > serial = XXYY > [ups2] > driver = usbhid-ups > port = auto > serial = XXZZ > > take a look at the manpage of your driver for more information. > Feedback on working units that are not listed in the HCL ( > http://www.networkupstools.org/stable-hcl.html) is also welcome. > > cheers, > Arnaud > -- > Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com > Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ > Debian Developer - http://www.debian.org > Free Software Developer - http://arnaud.quette.free.fr/ > > Petr >> >> Sebastián León del Moral píše v St 27. 07. 2011 v 11:25 +0200: >> > Hi, my name is Sebastián from Spain >> > >> > I need help for that. I have 2 salicru ups I need monitor with a fedora >> > 14 pc. Someone knows if i can configure ups.conf to monitor one or >> > another ups? only make a upsc "ups" for take data. The upses are >> > connected via usb and nut always read the first one connected. The >> > upses are the same model. >> > >> > Thanks for all! >> > >> > Sebastián León del Moral >> > [email protected] >> > >> > >> > _______________________________________________ >> > Nut-upsuser mailing list >> > [email protected] >> > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser >> >> >> >> _______________________________________________ >> Nut-upsuser mailing list >> [email protected] >> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser >> > > > >
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
