> Not sure what you mean here by "provide your own" - you can change the > configuration file path with "--sysconfdir=...", which could be placed > on another filesystem. I tried to copy ups.conf buildroot/output/build/nut-2.6.1/conf and hoped it would be installed in the image in /etc. I am not sure however if the nut distribution copies it to the image or if buildroot does it.
> CC: [email protected] > From: [email protected] > To: [email protected] > Subject: Re: [Nut-upsuser] cross-compiling nut > Date: Sat, 30 Jul 2011 11:47:52 -0400 > > On Jul 30, 2011, at 11:09 AM, Tilman Glotzner wrote: > > > - Is there a config option to only compile only a particular ups > > driver (to reduce the size of the image) ? > > $ ./configure --help > ... > [--with-drivers=driver[,driver]] > Only use specific drivers (all) > > I suppose the word "use" isn't the most descriptive here. > > Or, if you are rebuilding manually, you can just use "cd drivers; make > apcsmart" > > > - And is there an configure option to provide my own config file in > > etc ? etc resides on the flash as well... > > - And is there a command line option for upsdrvctl to read a config > > file other than /etc/ups.conf ? > > Not sure what you mean here by "provide your own" - you can change the > configuration file path with "--sysconfdir=...", which could be placed > on another filesystem.
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
