On Aug 31, 2011, at 9:13 AM, Ian Wells wrote:
Hi All,
I’m trying to configure NUT 2.6.1 on Windows 2008 R2 to recognise
two APC Smart-UPS 3000 devices connected via USB cables.
I have correctly installed libusb-win32, and run the driver wizard.
In my ups.conf I have :-
[Upper]
driver = usbhid-ups
port = auto
desc = "Upper Smart-UPS 3000"
vendorid = 051d
serial = “JS1011030553”
^ Does your configuration file have regular double-quotes (") or the
"smart quotes" shown above? (“”)
[Lower]
driver = usbhid-ups
port = auto
desc = "Lower Smart-UPS 3000"
vendorid = 051d
serial = "JS1011030544"
However, this configuration cause the driver to crash.
I have further identifed that inclusion of even a single instance of
the ‘vendorid’ or ‘serial’ entries will also cause the driver to
crash i.e. :-
[Upper]
driver = usbhid-ups
port = auto
desc = "Upper Smart-UPS 3000"
# vendorid = 051d
serial = “JS1011030553”
#[Lower]
# driver = usbhid-ups
# port = auto
# desc = "Lower Smart-UPS 3000"
# vendorid = 051d
# serial = "JS1011030544"
Or
[Upper]
driver = usbhid-ups
port = auto
desc = "Upper Smart-UPS 3000"
vendorid = 051d
# serial = “JS1011030553”
#[Lower]
# driver = usbhid-ups
# port = auto
# desc = "Lower Smart-UPS 3000"
# vendorid = 051d
# serial = "JS1011030544"
Can you let me know whether the driver on Windows _should_ be
capable of supporting two UPS devices in this way?
I CC'd Fred at Eaton, who is working on the Windows port. If the code
is in place, maybe he has some suggestions for getting a crash dump to
help debug this.
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
