Here we go! This one for 06da:0601:
0.000000 send_to_all: SETINFO driver.parameter.port "auto" 0.000117 send_to_all: SETINFO driver.parameter.subdriver "ippon" 0.000179 send_to_all: SETINFO driver.parameter.vendorid "06da" 0.000230 send_to_all: SETINFO driver.parameter.productid "0601" 0.000315 debug level is '5' 0.002600 Checking device (1D6B/0003) (009/001) 0.002832 - VendorID: 1d6b 0.002879 - ProductID: 0003 0.002916 - Manufacturer: Linux 3.0.0-16-generic xhci_hcd 0.002955 - Product: xHCI Host Controller 0.002992 - Serial Number: 0000:03:00.0 0.003028 - Bus: 009 0.003063 Trying to match device 0.003118 Device does not match - skipping 0.003165 Checking device (1D6B/0002) (008/001) 0.003245 - VendorID: 1d6b 0.003285 - ProductID: 0002 0.003321 - Manufacturer: Linux 3.0.0-16-generic xhci_hcd 0.003417 - Product: xHCI Host Controller 0.003453 - Serial Number: 0000:03:00.0 0.003489 - Bus: 008 0.003524 Trying to match device 0.003562 Device does not match - skipping 0.003604 Checking device (1D6B/0001) (007/001) 0.003677 - VendorID: 1d6b 0.003716 - ProductID: 0001 0.003751 - Manufacturer: Linux 3.0.0-16-generic ohci_hcd 0.003787 - Product: OHCI Host Controller 0.003823 - Serial Number: 0000:00:16.0 0.003859 - Bus: 007 0.003894 Trying to match device 0.003932 Device does not match - skipping 0.003974 Checking device (1D6B/0001) (006/001) 0.004045 - VendorID: 1d6b 0.004083 - ProductID: 0001 0.004118 - Manufacturer: Linux 3.0.0-16-generic ohci_hcd 0.004154 - Product: OHCI Host Controller 0.004190 - Serial Number: 0000:00:14.5 0.004226 - Bus: 006 0.004260 Trying to match device 0.004299 Device does not match - skipping 0.004340 Checking device (1D6B/0001) (005/001) 0.004410 - VendorID: 1d6b 0.004454 - ProductID: 0001 0.004489 - Manufacturer: Linux 3.0.0-16-generic ohci_hcd 0.004526 - Product: OHCI Host Controller 0.004562 - Serial Number: 0000:00:13.0 0.004834 - Bus: 005 0.004872 Trying to match device 0.004911 Device does not match - skipping 0.004954 Checking device (1D6B/0001) (004/001) 0.005027 - VendorID: 1d6b 0.005065 - ProductID: 0001 0.005101 - Manufacturer: Linux 3.0.0-16-generic ohci_hcd 0.005138 - Product: OHCI Host Controller 0.005174 - Serial Number: 0000:00:12.0 0.005211 - Bus: 004 0.005248 Trying to match device 0.005288 Device does not match - skipping 0.005329 Checking device (1D6B/0002) (003/001) 0.005449 - VendorID: 1d6b 0.005524 - ProductID: 0002 0.005560 - Manufacturer: Linux 3.0.0-16-generic ehci_hcd 0.005597 - Product: EHCI Host Controller 0.005634 - Serial Number: 0000:00:16.2 0.005670 - Bus: 003 0.005705 Trying to match device 0.005744 Device does not match - skipping 0.005787 Checking device (058F/6387) (002/006) 0.008028 - VendorID: 058f 0.008069 - ProductID: 6387 0.008080 - Manufacturer: Generic 0.008092 - Product: Mass Storage 0.008103 - Serial Number: FFB279FA 0.010059 - Bus: 002 0.010090 Trying to match device 0.010168 Device does not match - skipping 0.010201 Checking device (046D/C50E) (002/005) 0.017189 - VendorID: 046d 0.017231 - ProductID: c50e 0.017241 - Manufacturer: Logitech 0.017252 - Product: USB Receiver 0.017262 - Serial Number: unknown 0.017272 - Bus: 002 0.017282 Trying to match device 0.017304 Device does not match - skipping 0.017330 Checking device (06DA/0002) (002/004) 0.020214 - VendorID: 06da 0.020359 - ProductID: 0002 0.020370 - Manufacturer: ONLINE 0.020382 - Product: YUNTO 0.020392 - Serial Number: unknown 0.020402 - Bus: 002 0.020412 Trying to match device 0.020496 Device does not match - skipping 0.020528 Checking device (06DA/0601) (002/003) 0.032763 - VendorID: 06da 0.032814 - ProductID: 0601 0.032825 - Manufacturer: ONLINE 0.032835 - Product: ZINTO 0.032848 - Serial Number: unknown 0.032858 - Bus: 002 0.032868 Trying to match device 0.032939 Device matches 0.033027 failed to claim USB device: could not claim interface 0: Device or resource busy 0.033429 detached kernel driver from USB device... 0.035076 send_to_all: SETINFO ups.vendorid "06da" 0.035123 send_to_all: SETINFO ups.productid "0601" 0.035153 send_to_all: SETINFO device.type "ups" 0.035182 send_to_all: SETINFO driver.version "2.6.1" 0.035198 send_to_all: SETINFO driver.version.internal "0.03" 0.035213 send_to_all: SETINFO driver.name "blazer_usb" 0.035225 Trying megatec protocol... 0.037597 send: Q1 0.286187 read: (227.0 222.0 227.0 036 50.0 27.4 60.4 00001001 0.286284 send_to_all: SETINFO input.voltage "227.0" 0.286309 send_to_all: SETINFO input.voltage.fault "222.0" 0.286329 send_to_all: SETINFO output.voltage "227.0" 0.286371 send_to_all: SETINFO ups.load "36" 0.286388 send_to_all: SETINFO input.frequency "50.0" 0.286409 send_to_all: SETINFO battery.voltage "27.40" 0.286427 send_to_all: SETINFO ups.temperature "60.4" 0.286442 send_to_all: SETINFO beeper.status "enabled" 0.286458 send_to_all: SETINFO ups.type "offline / line interactive" 0.286477 send_to_all: SETINFO ups.status "OL" 0.286490 Status read in 1 tries 0.286501 Supported UPS detected with megatec protocol 0.289097 send: F 0.478172 read: #220.0 003 024.0 50.0 0.478246 send_to_all: SETINFO input.voltage.nominal "220" 0.478267 send_to_all: SETINFO input.current.nominal "3.0" 0.478288 send_to_all: SETINFO battery.voltage.nominal "24.0" 0.478306 send_to_all: SETINFO input.frequency.nominal "50" 0.478318 Ratings read in 1 tries 0.480405 send: I 0.622185 read: I 0.622238 blazer_vendor: invalid start character [49] 0.622251 Vendor information read 1 failed 0.624344 send: I 0.766136 read: I 0.766183 blazer_vendor: invalid start character [49] 0.766195 Vendor information read 2 failed 0.768442 send: I 0.910110 read: I 0.910154 blazer_vendor: invalid start character [49] 0.910167 Vendor information read 3 failed 0.910178 Vendor information unavailable 0.910191 Battery runtime will not be calculated (runtimecal not set) 0.910217 send_to_all: SETINFO ups.delay.start "180" 0.910233 send_to_all: SETINFO ups.delay.shutdown "30" 0.910247 send_to_all: ADDCMD beeper.toggle 0.910259 send_to_all: ADDCMD load.off 0.910271 send_to_all: ADDCMD load.on 0.910283 send_to_all: ADDCMD shutdown.return 0.910296 send_to_all: ADDCMD shutdown.stayoff 0.910308 send_to_all: ADDCMD shutdown.stop 0.910321 send_to_all: ADDCMD test.battery.start 0.910334 send_to_all: ADDCMD test.battery.start.deep 0.910347 send_to_all: ADDCMD test.battery.start.quick 0.910360 send_to_all: ADDCMD test.battery.stop 0.912513 send: Q1 1.166081 read: (227.0 227.0 227.0 036 50.0 27.4 60.4 00001001 1.166154 send_to_all: SETINFO input.voltage.fault "227.0" 1.166207 send_to_all: DATAOK 1.166348 dstate_init: sock /var/run/nut/blazer_usb-mieionline open on fd 5 1.166369 send_to_all: SETINFO driver.parameter.pollinterval "2" 1.168210 send: Q1 1.422030 read: (226.9 226.9 226.9 035 50.0 27.4 60.4 00001001 1.422098 send_to_all: SETINFO input.voltage "226.9" 1.422120 send_to_all: SETINFO input.voltage.fault "226.9" 1.422140 send_to_all: SETINFO output.voltage "226.9" 1.422161 send_to_all: SETINFO ups.load "35" 3.170193 send: Q1 3.421773 read: (227.1 227.1 227.1 035 50.0 27.4 60.4 00001001 3.421879 send_to_all: SETINFO input.voltage "227.1" 3.421901 send_to_all: SETINFO input.voltage.fault "227.1" 3.421922 send_to_all: SETINFO output.voltage "227.1" 5.171788 send: Q1 5.421688 read: (227.1 227.1 227.1 040 50.0 27.4 60.4 00001001 5.421776 send_to_all: SETINFO ups.load "40" 7.173601 send: Q1 7.421350 read: (226.8 226.8 226.8 034 50.0 27.4 60.4 00001001 7.421422 send_to_all: SETINFO input.voltage "226.8" 7.421445 send_to_all: SETINFO input.voltage.fault "226.8" 7.421465 send_to_all: SETINFO output.voltage "226.8" 7.423444 send_to_all: SETINFO ups.load "34" 9.175457 send: Q1 9.421074 read: (226.9 226.9 226.9 036 50.0 27.4 60.4 00001001 9.421141 send_to_all: SETINFO input.voltage "226.9" 9.421163 send_to_all: SETINFO input.voltage.fault "226.9" 9.421183 send_to_all: SETINFO output.voltage "226.9" 9.421205 send_to_all: SETINFO ups.load "36" 11.175988 send: Q1 11.420717 read: (226.6 226.6 226.6 041 50.0 27.4 60.4 00001001 11.420796 send_to_all: SETINFO input.voltage "226.6" 11.420819 send_to_all: SETINFO input.voltage.fault "226.6" 11.420840 send_to_all: SETINFO output.voltage "226.6" 11.420861 send_to_all: SETINFO ups.load "41" 13.177678 send: Q1 13.420493 read: (226.5 226.6 226.6 038 50.0 27.4 60.4 00001001 13.420559 send_to_all: SETINFO input.voltage "226.5" 13.420593 send_to_all: SETINFO ups.load "38" 15.179302 send: Q1 15.436100 read: (226.7 226.7 226.7 039 50.0 27.4 60.4 00001001 15.436221 send_to_all: SETINFO input.voltage "226.7" 15.436274 send_to_all: SETINFO input.voltage.fault "226.7" 15.436409 send_to_all: SETINFO output.voltage "226.7" 15.436462 send_to_all: SETINFO ups.load "39" 17.181454 send: Q1 17.435942 read: (226.6 226.6 226.6 037 50.0 27.4 60.4 00001001 17.436010 send_to_all: SETINFO input.voltage "226.6" 17.436039 send_to_all: SETINFO input.voltage.fault "226.6" 17.436059 send_to_all: SETINFO output.voltage "226.6" 17.436080 send_to_all: SETINFO ups.load "37" 19.183448 send: Q1 19.435676 read: (226.5 226.5 226.5 035 50.0 27.4 60.4 00001001 19.435741 send_to_all: SETINFO input.voltage "226.5" 19.435763 send_to_all: SETINFO input.voltage.fault "226.5" 19.435783 send_to_all: SETINFO output.voltage "226.5" 19.435805 send_to_all: SETINFO ups.load "35" 21.183681 send: Q1 21.435385 read: (226.6 226.6 226.6 035 50.0 27.4 60.4 00001001 21.435456 send_to_all: SETINFO input.voltage "226.6" 21.435478 send_to_all: SETINFO input.voltage.fault "226.6" 21.435499 send_to_all: SETINFO output.voltage "226.6" 23.185874 send: Q1 23.435072 read: (226.5 226.5 226.5 034 50.0 27.4 60.4 00001001 23.435137 send_to_all: SETINFO input.voltage "226.5" 23.435159 send_to_all: SETINFO input.voltage.fault "226.5" 23.435181 send_to_all: SETINFO output.voltage "226.5" 23.435202 send_to_all: SETINFO ups.load "34" 25.187621 send: Q1 25.434841 read: (226.5 226.5 226.5 036 50.0 27.4 60.4 00001001 25.434924 send_to_all: SETINFO ups.load "36" 27.188584 send: Q1 27.434544 read: (226.3 226.3 226.3 035 50.0 27.4 60.4 00001001 27.434611 send_to_all: SETINFO input.voltage "226.3" 27.434633 send_to_all: SETINFO input.voltage.fault "226.3" 27.434653 send_to_all: SETINFO output.voltage "226.3" 27.434675 send_to_all: SETINFO ups.load "35" 29.189787 send: Q1 29.434178 read: (226.5 226.5 226.5 036 50.0 27.4 60.4 00001001 29.434249 send_to_all: SETINFO input.voltage "226.5" 29.434271 send_to_all: SETINFO input.voltage.fault "226.5" 29.434292 send_to_all: SETINFO output.voltage "226.5" 29.434314 send_to_all: SETINFO ups.load "36" 31.191738 send: Q1 31.450026 read: (226.3 226.3 226.3 039 50.0 27.4 60.4 00001001 31.450091 send_to_all: SETINFO input.voltage "226.3" 31.450114 send_to_all: SETINFO input.voltage.fault "226.3" 31.450134 send_to_all: SETINFO output.voltage "226.3" 31.450154 send_to_all: SETINFO ups.load "39" 33.193844 send: Q1 33.449923 read: (226.3 226.3 226.3 034 50.0 27.4 60.4 00001001 33.450027 send_to_all: SETINFO ups.load "34" 2012/2/1 Arnaud Quette <[email protected]>: > 2012/2/1 Mario <[email protected]>: >> Arnaud Quette <aquette.dev <at> gmail.com> writes: >> >>> so you should also use "sudo", Ie: >>> $ sudo /path/to/blazer_usb -DDDDD -a <upsname> >>> >> Unfortunately I am already root, I have enabled the root account. I have also >> tried to kill processes that may lock usb but with no luck. >> >> What can I do? > > I forgot a point: since your USB IDs are not yet known, udev rules are > not there. > So try running as root using: > $ /path/to/blazer_usb -u root -DDDDD -a <upsname> > $ upsd -u root > > and you should be done. > > cheers, > Arnaud > -- > Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com > Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ > Debian Developer - http://www.debian.org > Free Software Developer - http://arnaud.quette.free.fr/ _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
