Hello, schrieb Arnaud Quette, Am 16.02.2012 18:48:
> Can you please counter check, and report back upsc/upsrw/upscmd upsc: # upsc YQ450 battery.voltage: 13.40 beeper.status: disabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0002 driver.parameter.protocol: zinto driver.parameter.subdriver: cypress driver.parameter.vendorid: 06da driver.version: 2.6.3 driver.version.internal: 0.04 input.frequency: 50.0 input.voltage: 232.0 input.voltage.fault: 1.0 output.voltage: 232.0 ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 0 ups.productid: 0002 ups.status: OL BYPASS ups.temperature: 25.0 ups.type: offline / line interactive ups.vendorid: 06da # upsrw -u xxx -p xxx -s ups.delay.start YQ450 Enter new value for ups.delay.start: 90 Unexpected response from upsd: ERR ACCESS-DENIED # upsrw -u xxx -p xxx -s ups.delay.shutdown YQ450 Enter new value for ups.delay.shutdown: 90 Unexpected response from upsd: ERR ACCESS-DENIED # upscmd -u xxx -p xxx YQ450 shutdown.return 1 Unexpected response from upsd: ERR ACCESS-DENIED > output, along with the shutdown test: > http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html#Shutdown_design > while doing shutdown # upslog -s yq450 -i 2 -l - Network UPS Tools upslog 2.6.3 logging status of yq450 to - (2s intervals) 20120227 091805 NA 0.0 0 [OB] 25.0 0.0 20120227 091807 NA 0.0 0 [OB] 25.0 0.0 20120227 091809 NA 0.0 0 [OB] 25.0 0.0 20120227 091811 NA 0.0 0 [OB] 25.0 0.0 20120227 091957 NA NA NA [FSD WAIT] NA 0.0 20120227 091959 NA 0.0 0 [FSD OB] 25.0 0.0 20120227 092001 NA 0.0 0 [FSD OB LB] 25.0 0.0 20120227 092003 NA 0.0 0 [FSD OB LB] 25.0 0.0 so, no battery voltage is displayed parallel /lib/nut/blazer_usb -a YQ450 -DDDDD 23.832061 read: (000.0 001.0 230.0 000 00.0 12.5 25.0 10001000 25.472224 send: Q1 25.816057 read: (000.0 001.0 230.0 000 00.0 12.5 25.0 11001000 25.816249 send_to_all: SETINFO ups.status "OB LB" 27.473243 send: Q1 27.832053 read: (000.0 001.0 230.0 000 00.0 12.5 25.0 11001000 29.476227 send: Q1 29.848055 read: (000.0 001.0 230.0 000 00.0 12.5 25.0 11001000 31.478227 send: Q1 31.832056 read: (000.0 001.0 230.0 000 00.0 12.5 25.0 11001000 32.070549 send_to_one: PONG Temperature is always 25.0°C When cutting off power to the UPS, power to the outlets isn't switched off despite the low battery warning (at least 15 minutes after cutting power) Do I have a faulty UPS?2 Thomas _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
