Hi, Charles!
I found another UPS device then tried again.
The UPS model is: CyberPower DX600E, Europe version:
http://www.cyberpower-eu.com/products/ups_systems/dx/dx600e.htm
Also I did the same operation as before (and the previous APC device still
connected):
# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 002: ID 05e3:0608
Bus 001 Device 004: ID 051d:0002
Bus 001 Device 005: ID 0764:0501
But still:
# /usr/local/ups/bin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.6.3
Network UPS Tools - Generic HID driver 0.35 (2.6.3)
USB communication driver 0.31
No matching HID UPS found
Driver failed to start (exit status=1)
I believe I might have done something wrong or something missed, but I had did
what user-manual had told from Chapter 2.1 to 6.2.
Best Regards
--
Andrew Chang
2012-03-08
At 2012-03-08 08:16:29,"Andrew Min Chang" <[email protected]> wrote:
Hi, Charles!
# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 002: ID 05e3:0608
Bus 001 Device 003: ID 051d:0002
And if I make the UPS disconnected, it is:
# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 002: ID 05e3:0608
Best Regards
--
Andrew Chang
2012-03-08
At 2012-03-07 22:22:54,"Charles Lepple" <[email protected]> wrote:
>On Mar 7, 2012, at 5:04 AM, Andrew Min Chang wrote:
>
>> No matching HID UPS found
>> Driver failed to start (exit status=1)
>>
>> The User Manual says that I may using a wrong driver when this happens. But
>> I checked and found there was only one driver(usbhid-ups) available for APC
>> USB UPS machine.
>
>What does 'lsusb' say about this UPS?
>
>--
>Charles Lepple
>clepple@gmail
>
>
>
三八节，网易微博替男人伸冤！
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
