Hi all I need to control an UPS TSSahara usign NUT in pfsense and it is not working.
Can somenone help ? ups.conf user=root [tsshara] driver = megatec_usb port = auto vendorid = 0483 productid = 0035 desc = "No Break TS-Shara" [myups] driver=usbhid-ups port=auto /usr/local/libexec/nut/megatec_usb -u root -a tsshara -DD Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec_usb] Carlos Rodrigues (c) 2003-2008 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007 debug level is '2' Checking device (0483/0035) (/dev/usb//dev/ugen2.2) - VendorID: 0483 - ProductID: 0035 - Manufacturer: STMicroelectronics - Product: ST7 RS232 USB BRIDGE - Serial Number: unknown - Bus: /dev/usb Trying to match device Device does not match - skipping Checking device (0000/0000) (/dev/usb//dev/ugen4.1) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Intel - Product: EHCI root HUB - Serial Number: unknown - Bus: /dev/usb Trying to match device Device does not match - skipping Checking device (0000/0000) (/dev/usb//dev/ugen3.1) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Intel - Product: UHCI root HUB - Serial Number: unknown - Bus: /dev/usb Trying to match device Device does not match - skipping Checking device (0000/0000) (/dev/usb//dev/ugen2.1) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Intel - Product: UHCI root HUB - Serial Number: unknown - Bus: /dev/usb Trying to match device Device does not match - skipping Checking device (0000/0000) (/dev/usb//dev/ugen1.1) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Intel - Product: UHCI root HUB - Serial Number: unknown - Bus: /dev/usb Trying to match device Device does not match - skipping Checking device (0000/0000) (/dev/usb//dev/ugen0.1) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Intel - Product: UHCI root HUB - Serial Number: unknown - Bus: /dev/usb Trying to match device Device does not match - skipping No appropriate HID device found No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with at least 'vendorid' and 'subdriver' options specified. Please refer to the man page for details about these options (man 8 megatec_usb). Please report your results to the NUT user's mailing list <[email protected]>. Atenciosamente Cícero Jacobi Filho [email protected] +55-48-96537527 (TIM) +55-48-30245005 skype : cjacobi
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
