On Wed, Sep 5, 2012 at 5:58 PM, Arnaud Quette <[email protected]> wrote: >> >> The only thing plugged into this UPS is the power supply for the >> RaspberryPi - nut reports the load as 0.0% :) I'm going to also plug in the >> 5-port switch and ADSL modem/router, I expect to be online for some time >> when there is a local power failure :D > > > RPi is maybe too green (Ie not consuming enough power) to be visible. > I'm interesting in the result with more load... >
RPi normally is consuming about 2W (if it doesn't have to power anything via USB), so way under 0.5% of an average UPS. Couple of weeks ago when I was running my tests nut@RPi was reliably reporting the about 33% of load I have on my UPS (for the time being I have also a cheap kill-a-watt meter on the UPS input): > ups.firmware: Cont:00.50 Inve:01.50 > ups.load: 33.3 > ups.mfr: Eaton > ups.model: POWERWARE UPS 700i > ups.power.nominal: 700 Cheers, Massimo _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
