Hello Denis, I am a bit lost now. Can you get further debugging information regarding USB ? This is the way to go :
1- Get Sysinternals' Debugview here http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx 2- Run DebugView 3- In a console, type : set USB_DEBUG=255 4- In the same console start usbhid-ups You should see "libusb0-dll" messages appear in debugview. Please send me this log. It would be great if you can do this test for both version of nut (2.6.0 and 2.6.5) Thank you. Fred -- Eaton Opensource Team - http://opensource.eaton.com ----------------------------- ----------------------------- ________________________________________ From: Denis Serov [[email protected]] Sent: Monday, September 03, 2012 9:04 PM To: Bohe, Frederic; [email protected] Subject: RE: [Nut-upsuser] Data stale and Back UPS ES Hello Frederic! Yes, I told about libusb driver, not usbhid-ups one. Anyway, here are the logs... Thanks! Denis > -----Original Message----- > From: [email protected] [mailto:[email protected]] > Sent: Monday, September 03, 2012 3:17 PM > To: [email protected]; [email protected] > Subject: RE: [Nut-upsuser] Data stale and Back UPS ES > > >> Finally, I installed 2.6.5-1 with drivers from 2.6.0-1 and got data stale >> (as in my first message). > > I guess you mean libusb drivers, not usbhid-ups driver ? > > I have checked the code history for usbhid-ups driver without finding > anything that rings a bell on this issue. > > Can you send the complete (and compressed) output of usbhid-ups version > 2.6.0-1 and 2.6.5-1 (let's say the first 10 seconds using -DDDDD switch) > please ? > > Regards, > Fred _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
