Hi Arnaud, Please find the file attached.
Thank you, Sergey On Mon, Sep 24, 2012 at 12:02 PM, Arnaud Quette <[email protected]>wrote: > > 2012/9/24 Sergey Talchuk <[email protected]> > >> Hi Arnaud! >> > > Hi Sergey, > > Thanks for you reply. >> Please find the file attached. >> > > I forgot to ask you to compress the output before sending it to the list > (we have a 40Kb limit). > > Could you please do the following tests: > # upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle 2 > # upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle disable > > check the beeper.status and send me back the *compressed* output. > Depending on your feedback, I should be able to address this > programmatically. > > cheers, > Arnaud > -- > Linux / Unix / Opensource Engineering Expert - Eaton - > http://opensource.eaton.com > Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org > > Debian Developer - http://www.debian.org > Free Software Developer - http://arnaud.quette.fr > > >> On Wed, Sep 19, 2012 at 9:39 PM, Arnaud Quette <[email protected]>wrote: >> >>> >>> 2012/9/19 Sergey Talchuk <[email protected]> >>> >>>> Hi Arnaud! >>>> >>> >>> Hi Sergey >>> >>> Powercom Imperial IMP-525AP seems to be fully compatible with NUT. >>>> Unfortunately, I can not disable beeper. >>>> >>>> upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle >>>> returns *OK*, however, ups.beeper.status=enabled >>>> >>>> Thank you, >>>> Sergey >>>> >>>> ========== >>>> Additional info: >>>> 1) >>>> $ upsc powercom >>>> battery.charge: 100 >>>> battery.charge.low: 10 >>>> battery.charge.warning: 30 >>>> battery.date: 2010/01/01 >>>> battery.runtime: 2432 >>>> battery.type: PbAc >>>> device.mfr: POWERCOM Co.,LTD >>>> device.model: UPS IMP--525AP FW3.A2 >>>> device.serial: 3A2-0000-0001 >>>> device.type: ups >>>> driver.name: usbhid-ups >>>> driver.parameter.pollfreq: 30 >>>> driver.parameter.pollinterval: 2 >>>> driver.parameter.port: auto >>>> driver.version: 2.6.5 >>>> driver.version.data: PowerCOM HID 0.3 >>>> driver.version.internal: 0.37 >>>> input.frequency: 50.0 >>>> input.voltage: 230.0 >>>> input.voltage.nominal: 220 >>>> output.frequency: 50.0 >>>> output.voltage: 230.0 >>>> output.voltage.nominal: 220 >>>> ups.beeper.status: enabled >>>> ups.date: 2010/01/01 >>>> ups.load: 0 >>>> ups.mfr: POWERCOM Co.,LTD >>>> ups.model: UPS IMP--525AP FW3.A2 >>>> ups.productid: 00a2 >>>> ups.serial: 3A2-0000-0001 >>>> ups.status: OL >>>> ups.test.result: Done and passed >>>> ups.vendorid: 0d9f >>>> >>>> 2) >>>> $ upscmd -l powercom >>>> Instant commands supported on UPS [powercom]: >>>> >>>> beeper.toggle - Toggle the UPS beeper >>>> test.battery.start.quick - Start a quick battery test >>>> >>>> 3) >>>> $ upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle >>>> OK >>>> >>>> 4) >>>> $ upsc powercom | grep 'beeper' >>>> ups.beeper.status: enabled >>>> >>> >>> can you please: >>> - restart the driver in debug mode (level 5) using: >>> # upsdrvctl stop powercom && /path/to/usbhid-ups -DDDDD -a powercom >>> - in a separate console, send your upscmd, as in the above step (3) >>> - send the driver trace excerpt, including at least 10 seconds of traces >>> after executing the command. >>> >>> cheers, >>> Arnaud >>> -- >>> NUT Project Leader - http://www.networkupstools.org >>> Debian Developer - http://www.debian.org >>> Free Software Developer - http://arnaud.quette.fr >>> >>> >> >
beeper_toggle.7z
Description: Binary data
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
