2012/10/16 Pratt Chris <chris.pr...@comptel.com>: > Hi. Hi Chris,
> I’m trying to configure NUT to manage a HP R12000/3 3-phase UPS fitted with > an AF401A management module but it immediately crashes with a segmentation > fault. right, we have recently identified a regression WRT outlet handling. I have a stagging patch for ~2 months, but still no time to test and complete it. Would you be able to patch, compile and test on your side? Best regards, Arnaud -- Linux / Unix / Opensource Engineering Expert - Eaton - http://opensource.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.fr > O/S is CentOS 6.3 64-bit > > NUT built from tarball > > AF401A Firmware version 2.1.3 > > Extract from /etc/ups/ups.conf > > [UPS-HP01] > > driver = snmp-ups > > port = 192.168.0.89 > > desc = " HP R12000/3 UPS" > > > > Output from starting the driver > > [root@ups-monitor log]# upsdrvctl start > > Network UPS Tools - UPS driver controller 2.6.4 > > Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) > > kill: No such process > > Detected HP R12000/3UPS on host 192.168.0.89 (mib: cpqpower 1.5) > > Driver exited abnormally > > [root@ups-monitor log]# > > > > Extract from /var/log/messages > > Oct 15 15:02:32 ups-monitor kernel: snmp-ups[16840]: segfault at 0 ip > 000000354707a98c sp 00007fff11f2a8b8 error 4 in > libc-2.12.so[3547000000+189000] > > Debug output attached. > > I’ve downloaded the latest mib file (v1.64) from HP’s website but I can’t > find any way to add it to the source files. I’ve seen references to the > mib2nut mapping but, again, no help on how to achieve this. > > > > Thanks, > > > > > > > > Chris Pratt > > Development Infrastructure Manager > > Comptel Corporation > > 69 Suttons Business Park, Sutton Park Avenue, Reading, RG6 1AZ, UK > > T: +44 118 929 4176 | M: +44 7979 854 307 | F: +44 118 929 4001 > > chris.pr...@comptel.com > > www.comptel.com > > > > > > > ________________________________ > Disclaimer: This message and any attachments thereto are intended solely for > the addressed recipient(s) and may contain confidential information. > If you are not the intended recipient, please notify the sender by reply > e-mail and delete the e-mail (including any attachments thereto) without > producing, distributing or retaining any copies thereof. Any review, > dissemination or other use of, or taking of any action in reliance upon, > this information by persons or entities other than the intended recipient(s) > is prohibited. > Thank you. > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser@lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser