I have an APC 9210 PDU in my rack. It's connected to the network and is configurable by web access.
I'd like to control it in combination with my ups. Unfortunately I cannot get NUT to recognise this PDU. Here's my ups.conf section: [apc] driver = snmp-ups port = 192.168.10.21 mibs = auto community = public snmp_version = v1 running upsdrvctl gives this: $ sudo /sbin/upsdrvctl start apc Network UPS Tools - UPS driver controller 2.6.5 Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) No matching MIB found for sysOID '.1.3.6.1.4.1.318.1.3.4.5'! Please report it to NUT developers, with an 'upsc' output for your device. Going back to the classic MIB detection method. No supported device detected Driver failed to start (exit status=1) $ What's the upsc output that the developers want? I have a MIB file supplied from APC, but is there a way I can give this to upsd to use? Cheers, -- Graeme Hilton _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
