Hi! I just installed a new CP1000PFCLCD (Cyber Power PFC Sinewave UPS) and everything appears to be working correctly, except that I have an oddly high output voltage reading from nut. All of the other values seem consistent with what the front-panel LCD says except for this one.
Is this something that needs a correction factor, or perhaps the value the driver is reading has been remapped? BTW, the value has moved from a low of 136 to a high of 142. So it seems to be measuring *something* that fluctuates! :) battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2790 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 16.0 battery.voltage.nominal: 24 device.mfr: CP1000PFCLCD device.model: CRDA103*AF1 device.serial: CPS device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.3 driver.version.data: CyberPower HID 0.3 driver.version.internal: 0.35 input.transfer.high: 139 input.transfer.low: 88 input.voltage: 119.0 input.voltage.nominal: 120 Really high --> output.voltage: 136.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 12 ups.mfr: CP1000PFCLCD ups.model: CRDA103*AF1 ups.productid: 0501 ups.realpower.nominal: 600 ups.serial: CPS ups.status: OL ups.test.result: No test initiated ups.timer.shutdown: -60 ups.timer.start: -60 ups.vendorid: 0764 _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
