On Jul 9, 2013, at 9:04 AM, Gregor Burck wrote: > we bought two Smart-UPS X 1500 FW:UPS 09.1 / ID=20 [...]
> I see there should be problems to get it work with a free daemon like nut, > but are there some hints using it? > In my ups.conf I tried: > > [apc001] > driver = apcsmart > port = auto > desc = "Smart APC" Only the USB drivers should work with port = auto. The "apcsmart" driver connects over the serial port, so under Linux, you would need to pass something like "port = /dev/ttyS0". To connect over USB, change to "driver = usbhid-ups". > > And I get broadcast messages when I connect/disconnect the device like: > Broadcast Message from root@glus > (somewhere) at 14:24 ... > > Communications restored with UPS glustersv001 Not sure I understand what you did here. Are you disconnecting the USB or AC connection? Also, apcsmart shouldn't have connected at all with "port = auto". -- Charles Lepple clepple@gmail _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
