On Jul 31, 2013, at 9:07 AM, James HORLEY wrote: > I’m wondering if what I have done is good : > # get the source from github on my computer > # autogen.sh > # name=nut > # ./configure --prefix=/ --sysconfdir=/etc/$name --mandir=/usr/share/man > --libdir=/usr/lib --includedir=/usr/include --datadir=/usr/share/$name > --with-statepath=/var/run/nut --with-altpidpath=/var/run/nut > --with-drvpath=/lib/nut --with-pidpath=/var/run/$name > --with-user=$name –with-group=$name --without-ssl If these are the same parameters as are used to build the .deb, then that should owrk.
> There was an error : > ./configure: line 7079: syntax error near unexpected token `CPPUNIT,' > ./configure: line 7079: `PKG_CHECK_MODULES(CPPUNIT, cppunit, > have_cppunit=yes, have_cppunit=no)' Do you have pkg-config installed? > I put in commentary the line PKG_CHECK_MODULES(CPPUNIT, cppunit, > have_cppunit=yes, have_cppunit=no) then > # make > # make install > I took the driver voltronic_ser then from my workstation put it in the > server, change the ups.conf and try it. > The command “upscmd –u admin myups shutdown.return” now work (shutting down > server then ups). > Unfortunately, when I do “shutdown –h +0”, the ups is never shut down. After > a little research, it appears that the line “upsmon –K >/dev/null 2>&1” in > ups-monitor always return 1 so the line “exec /etc/init.d/nut-server > poweroff” is never execute. For initial shutdown testing, I would recommend using a dummy load (such as a lamp) and plug the server into another UPS or directly to line power. Then, you can remove power from the UPS and run "upsmon -K" from the command line (without redirection) to see why it is failing. > I’m ussing upssched in upsmon.conf, do I need to create the flag with my > script before calling the shutdown –h +0? How (it’s supposed to be set > automaticaly)? or maybe I’m missing something. I don't recommend configuring upssched until basic shutdowns work. > Did I do the right thing by getting only the driver from my computer and put > it on the server? Or should I do a package of the whole nut (binary, conf > etc...) This is not guaranteed to work, but when the version numbers are close enough (2.6.4, 2.6.5, 2.7.1/master), it usually does work. The network protocol is more stable than the upsd/driver interface. -- Charles Lepple clepple@gmail _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
