Hi there, my HP R1500 G3 UPS doesn't apply my battery.charge.low value i set via upsrw.
Is this a common problem with this model in nut 2.6.4? Any ideas how to force the UPS to accept this value? Regards Jan % upsc hp1500 battery.charge: 100 battery.charge.low: 20 battery.charge.warning: 20 battery.runtime: 23917 battery.temperature: 49.0 battery.type: PbAc battery.voltage: 39.0 battery.voltage.nominal: 36.0 device.mfr: Hewlett-Packard device.model: HP R1500 G3 UPS device.part: AF471A device.serial: XXXXXXXXXX device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.4 driver.version.data: TrippLite HID 0.8 driver.version.internal: 0.37 input.frequency: 50.0 input.transfer.high: 266.0 input.transfer.low: 194.0 input.voltage: 232.0 input.voltage.nominal: 230 output.current: 0.00 output.frequency: 50.0 output.frequency.nominal: 50 output.voltage: 231.0 output.voltage.nominal: 230 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.firmware: 264 ups.load: 0 ups.load.nominal: 80 ups.mfr: Hewlett-Packard ups.model: HP R1500 G3 UPS ups.power: 0.0 ups.power.nominal: 1500 ups.productid: 1fe0 ups.serial: XXXXXXXXXX ups.status: OL CHRG ups.test.result: No test initiated ups.timer.reboot: -1 ups.timer.shutdown: -1 ups.timer.start: -1 ups.vendorid: 03f0 % upsc hp1500 server.version 2.6.4 % upsrw hp1500 [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Value: 20 [input.transfer.high] High voltage transfer point (V) Type: STRING Value: 266.0 [input.transfer.low] Low voltage transfer point (V) Type: STRING Value: 194.0 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Value: 20 [ups.delay.start] Interval to wait before (re)starting the load (seconds) Type: STRING Value: 30 % upsrw -s battery.charge.low=30 hp1500 Username (root): admin Password: OK % upsrw hp1500 [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Value: 20 [...] _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
