I'm using Nas4Free, and I'm getting the following message all the time in the
Daemon log:
usbhid-ups[42466]: libusb_get_report: Unknown Error
I'm running Nas4Free 9.2.0.1 Shigawire
Driver usbhid-ups
Nut Version is 2.7.1
Internal verion 0.38
UPS Info from Nas4Free
Manufacturer:CP1500PFCLCD
Model:CRCA102*AF1
The model UPS I'm running is a Cyber Power CP1500PFCLCD, other than this error,
the UPS seems to be communicating fine with the system, I'm getting information
from it, and I have tested it, and it seems to work just fine shutting down the
system gracefully upon power loss.
I tried to get the more detailed error dump, but as I'm a total noob with
Nas4Free/FreeBSD, the instructions didn't make a lot of sense to me. I tried
looking for the driver to run the command, but I wasn't sure of the location in
Nas4Free structure. I'm using an embedded install so if someone more familiar
with this, can tell me what to run, to get a more detailed report, I'd be more
than happy to do it.
It does seem that this error or something similar has occurred before, but I
wasn't able to find if there was a solution. I have done quite a bit of
searching, but so far I've come up empty.
Any help would be most appreciated.
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
