Hi, I am trying to set up NUT on a mini-ITX system running OpenBSD 5.5.
I have an APC Smart-UPS SC620 which runs perfectly well on Ubuntu, with nut-2.2.1. Ubuntu system uses ASUS motherboard. On mini-ITX system, I have Intel d2500cc motherboard with 4 serial ports. I've tested ports by connecting them with a null-modem cable and running cu in 2 terminals. Type in one terminal, output shows in the other, and vice versa. I disconnect UPS from Ubuntu system, connect it to OpenBSD, try apcsmart driver, and in 15 seconds it comes back with a message "unable to detect an APC Smart protocol UPS on port /dev/cua01". NUT is installed from OpenBSD packages, version 2.7.1. APC Smart protocol driver 3.2 (2.7.1) I suspect there is something special with serial ports on d2500cc motherboard as I also tried, out of curiousity, apcupsd from OpenBSD ports, and it failed to detect the UPS either. I wonder if anybody else has successfully run NUT on d2500cc motherboard with serial UPS? Thanks, Kastus _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
