Likely because 2.6.3 is not a current release. 2.7.2 (or 3?) is rhe current
version, and it makes little sense to backport changes.
Nut is a trivial compile . . . 'Use the source, Luke . . .'
- Tim
On October 17, 2014 6:05:35 PM CDT, Derek Harding <[email protected]> wrote:
>Hi,
>
>Back in 2011, it was reported that Liebert PSA devices persist in
>reporting OB (On Battery) when using usbhid-ups regardless of the
>actual
>state. Pier Paolo did some work (2011) which reportedly solved the
>issue. However, that doesn't seem to have reached mainstream and I now
>face the same problem.
>
>I'm using NUT 2.6.3 with a new Liebert PSA 1500Va that only ever
>reports
>OB and hence, when the power fails it doesn't trigger a shutdown
>(Ubuntu
>12.04 servers). Latching power fail through upsc works as it should.
>
>Any advice would be gratefully received but I would prefer not to have
>to rebuild/build. I don't mind replacing with a different, more up to
>date usbhid-ups.
>
>--
>Many thanks,
>Derek
>
>_______________________________________________
>Nut-upsuser mailing list
>[email protected]
>http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
