Hi all.
I was wrong in prevouis message, sorry.
I have tested this value on other Eaton-9130, and it shows different value, which corresponds to value on ups display.
So, its a real battery voltage.
Nominal value in debug calls Ups.PowerSummary.ConfigVoltage.
So, how can I get this value? Guru, pls help.
---
Valeri
11.11.2014, 12:01, "Charles Lepple" <[email protected]>:
On Nov 10, 2014, at 6:44 PM, Valeri Linchevski <[email protected]> wrote:
Parameter, "blabla" :-) really is Ups.PowerSummary.Voltage, debug output is in attach.Apparently some models are missing from the table that is consulted for "mge_type":
https://github.com/networkupstools/nut/blob/master/drivers/mge-hid.c#L201
Arnaud or Emilien,
Is there any way we could get the HID dump from a few of the other Powerware models to extend the following table?
https://github.com/networkupstools/nut/blob/master/drivers/mge-hid.c#L82
--
Charles Lepple
clepple@gmail
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
