Le Wed, 17 Dec 2014 19:34:43 -0500 Charles Lepple <[email protected]> écrivait:
> > > Also, I don't think we have any confirmation of the variables that the > > AP9620 provides. Here is the list of full 'upsc' output for various APC > > models: > > > > > > http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/ddl/APC/index.html > > Frantz, > > Actually, it would be useful if you could send a copy of the output of > 'upsc', 'upscmd -l' and 'upsrw' for your UPS. (If you prefer to mask out part > or all of the serial number, that is fine.) Let us know if any of the > returned values are known to be incorrect for your setup. Here they are at the end of this mail. Anyway, I found some answers in the APC Web site : FAQ for the New 230V Smart-UPS Models with LCD Interface : http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SMT3000RMI2U&total_watts=50&tab=documentation We recognize the fact that some Smart-UPS customers utilize their own custom interface based on APC‟s UPSLINK protocol. These applications may include those without standard operating systems or less common ones. For these situations, we recommend the optional AP9620 converter card that allows the new models to „speak‟ in UPSLINK. FAQ for the Legacy Communications SmartSlot Card AP9620 : http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=AP9620&tab=documentation Summary For customers of Smart-UPS units with the prefix SURTD, SMX and SMT the ability to communicate with APC's historical UPSLINK or APC proprietary USB usages no longer exists. While APC's recommendation remains using the latest version of APC UPS management solutions, we recognize that there are some customers may choose other options. So we will put an AP9620 card in our new UPS. Outputs of commands on the new UPS : - upsc : battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.runtime: 16200 battery.runtime.low: 120 battery.type: PbAc battery.voltage: 54.5 battery.voltage.nominal: 24.0 device.mfr: American Power Conversion device.model: Smart-UPS 3000 device.serial: AS1421244500 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.serial: AS14XXXXXXXX driver.version: 2.7.2 driver.version.data: APC HID 0.95 driver.version.internal: 0.38 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.firmware: UPS 08.8 / ID=18 ups.mfr: American Power Conversion ups.mfr.date: 2014/05/23 ups.model: Smart-UPS 3000 ups.productid: 0003 ups.serial: AS14XXXXXXXX ups.status: OL ups.timer.reboot: -1 ups.timer.shutdown: -1 ups.vendorid: 051d - upscmd -l : Instant commands supported on UPS [SU30002U-11]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) shutdown.reboot - Shut down the load briefly while rebooting the UPS shutdown.stop - Stop a shutdown in progress - upsrw : [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Maximum length: 10 Value: 10 [battery.runtime.low] Remaining battery runtime when UPS switches to LB (seconds) Type: STRING Maximum length: 10 Value: 120 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Maximum length: 10 Value: 20 -- Frantz de Germain Département Informatique UFR Sciences / DDN Université d'Angers _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
