Hi there, I have a question about a raspberry pi as NUT server and a "relay". I explain my situation: I have an UPS with USB port, so I connect it to the rasp. The problem is that I have a device manageable only via USB port. How can I handle this configuration? My assumptions are: 1) split the USB cable from UPS to rasp and device, but I don't know if it works 2) connect the UPS to rasp directly, so connect the rasp (by GPIO) to device as a Serial port with a DIY cable.
The problem with second solution is that I don't know if (and how) I can do it with NUT. Thanks a lot for all opinions. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
