Hi, I am trying to get NUT 2.7.2 working on my Solaris 11.2 system with a PowerWalker 2000 VI PSW UPS. I have carefully configured the software such that it 'works' using custom values in the ups.conf file:
driver = nutdrv_qx port = auto desc = "my UPS" protocol = voltronic-qs subdriver = cypress vendorid = 0665 productid = 5161 The problem I'm experiencing is that after a random amount of time, usually a few mins, the driver stops providing data and the and the application complains the data is "stale". More extensive debugging by running the driver sudo ./nutdrv_qx -u root -a MY_UPS -DDDDDD indicates the driver works normally then will randomly stop working at stop "send: QS". The debug logs show values successfully retrieved repeatedly until something like: .... Quick update... send: QS read: (247.9 239.1 248.0 005 50.0 27.5 --.- 00001001 update_status: OL update_status: !LB update_status: !CAL update_status: !FSD upsdrv_updateinfo... Quick update... send: QS (driver hangs here) I'm using Generic Q* USB/Serial driver 0.06 (2.7.2) with USB communication driver 0.32. Playing with pollinterval didn't help - Is there anything further I can do to help troubleshoot this problem? Regards, Richard
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
