On Apr 15, 2015, at 3:56 PM, Dan Craciun <[email protected]> wrote:
> I'm using Nut 2.7.2 with riello_ser and riello_usb 0.3 (upgraded from > 0.2). Raspbian on Raspberry PI model 2015. > > The drivers work on SENTR models. > > But on several GPSER the behaviour is erratic: > - usually, the serial driver cannot connect with the UPS. But, when left > on for several days, I found that it suddenly connected on one machine... > - the usb driver connects immediately, but failes to recognize the UPS > model and the readings are wrong. The GPSER models we have are single > phase, the drive sees them as 3-phase. The output of upsc is below. > You'll notice a lot of 52432 values. I CC'd Elio from Riello. Maybe they have seen this before? I am not very familiar with the code or the protocol, but a quick look at the driver says that you should be able to see traces of the data by passing "-DDD" to the driver. If you capture the logs this way, I don't think it needs to be for long - especially because it incorrectly detected the phases during initialization. Please gzip the output before emailing the list. Thanks! -- Charles Lepple clepple@gmail _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
