Hello. I have problem with connecting to APC SC1000 using NUT port for windows 2.6.5-6. Last working version is NUT 2.6.1-1. With the same config files it works well.
c:\NUT\bin>apcsmart.exe -a SC1000 Network UPS Tools - APC Smart protocol driver 3.1 (Windows-v2.6.5-5-7-g72f380c) APC command table version 3.1 w32_serial_open (COM3) setting initial state on COM3 0000007C = w32_serial_open (COM3) Warning: no locking method is available: No error [+яхЁрЎш єёях°эю чртхЁ°хэр. ] vmin_ 0, vtime_ 0 action 0 vtime 0, vmin 1 ReadTotalTimeoutConstant -2, ReadIntervalTimeout -1, ReadTotalTimeoutMultiplier -1 vmin_ 1, vtime_ 0 action 0 vtime 0, vmin -1 ReadTotalTimeoutConstant -2, ReadIntervalTimeout -1, ReadTotalTimeoutMultiplier -1 vmin_ -1, vtime_ 0 COM3: device reports different attributes than requested Communications with UPS lost: serial port read error: 1381(smartmode): Input/out put error Communications with UPS lost: serial port read error: 1392(smartmode): Input/out put error Communications with UPS lost: serial port read error: 1381(smartmode): Input/out put error Communications with UPS lost: serial port read error: 1392(smartmode): Input/out put error Communications with UPS lost: serial port read error: 1381(smartmode): Input/out put error Communications with UPS lost: serial port read error: 1392(smartmode): Input/out put error Communications with UPS lost: serial port read error: 1381(smartmode): Input/out put error Communications with UPS lost: serial port read error: 1392(smartmode): Input/out put error Communications with UPS lost: serial port read error: 1381(smartmode): Input/out put error Warning: excessive comm failures, limiting error reporting Communications with UPS lost: serial port read error: 1392(smartmode): Input/out put error unable to detect an APC Smart protocol UPS on port COM3 check the cabling, port name or model name and try again How to fix it? -- Fedotov Anton.
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
