I'm testing that my system will shutdown when the UPS has been on battery for 10 seconds. That all works fine....10 seconds after pulling the plug, my system does shut down. However, I am not getting the commands into the UPS telling it to power off and then power on. I had thought I read somewhere that these commands are sent automatically when "upsmon -c fsd" happens...but I can't find that, nor can I find any clear instructions on where I would put the commands to tell the UPS to start its shutdown and restart timers.
Sincerely, Robert G. Groner Software Engineer RTD Embedded Technologies, Inc. ISO 9001 and AS9100 Certified Ph: 814-234-8087 www.rtd.com<http://www.rtd.com/>
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
