I am not an expert on this matter but I can tell you I am having issues with Freebsd 10.2 with a Tripp Lite ups myself
Hopefully a dev can look in to FreeBSD 10.2 Sent from my LG G3. -----Original Message----- From: Mario Lobo <[email protected]> To: [email protected] Sent: Thu, 20 Aug 2015 3:50 PM Subject: [Nut-upsuser] APC BACK UPS 2200 model BZ2200BI-BR Hi; I'm having some trouble to comunicate with my just bought (08/17/15) Ups. According to SOLIS(8): SUPPORTED HARDWARE This driver has been tested with : Solis 1000 VA Solis 1500 VA Solis 2000 VA Solis 3000 VA Back-UPS BZ1200-BR Back-UPS BZ2200BI-BR So solis is the one to go for. Here is my scenario: SW: nut-2.7.3 (compiled from ports) OS: FreeBSD 10.2-STABLE #2 r286923 UPS: APC BACK UPS 2200 model BZ2200BI-BR (usb interface) using a printer-like usb cable (bundled) When I plug it in, here is what comes up: ugen1.2: <APC BY SCHNEIDER ELECTRIC> at usbus1 umodem0: <APC BY SCHNEIDER ELECTRIC APC USB SERIAL CONVERTER., class 2/0, rev 2.00/1.00, addr 2> on usbus1 umodem0: data interface 1, has no CM over data, has no break [>]usbconfig list ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen2.1: <EHCI root HUB Intel>at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.2:<APC USB SERIAL CONVERTER. APC BY SCHNEIDER ELECTRIC> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) And here are the devices I get after pluging it in: ttyU0 ttyU0.init ttyU0.lock cuaU0 cuaU0.init cuaU0.lock ugen1.2 (ugen1.2 -> usb/1.2.0) (no umodem0 device shows) ** ups.conf [lobos] driver = solis port = /dev/ttyU0 (or cuaU0, or ugen1.2) *** RESULTS ** ugen1.2 [>]/usr/local/libexec/nut/solis -D -a lobos -u root Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3) 0.000000 debug level is '1' 0.001551 tcgetattr(/dev/ugen1.2): Inappropriate ioctl for device ** ttyU0 [>]/usr/local/libexec/nut/solis -D -a lobos -u root Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3) 0.000000 debug level is '1' 21.249301 Solis not detected! aborting ... ** cuaU0 [>]/usr/local/libexec/nut/solis -D -a lobos -u root Network UPS Tools - Microsol Solis UPS driver 0.62 (2.7.3) 0.000000 debug level is '1' 21.065536 Solis not detected! aborting ... using 'upsdrvctl -t -u root start lobos' yields the same results. On windows it works with the software that I downloaded for it but the server is FreeBSD. Windows is just the desktop I use for occasional audio production. Would anyone have any pointers of what else I can try to make this work? Thanks for any suggestions. -- Mario Lobo http://www.mallavoodoo.com.br FreeBSD since 2.2.8 [not Pro-Audio.... YET!!] "UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things." _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
