No progress has been made: cable is UPS - PC 6 - 3 7 - 5 9 - 2
for ./blazer_ser -DDDDD -a infosec 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyS1" 0.000323 debug level is '5' 0.103068 send_to_all: SETINFO device.type "ups" 0.103104 send_to_all: SETINFO driver.version "2.7.3" 0.103118 send_to_all: SETINFO driver.version.internal "1.56" 0.103131 send_to_all: SETINFO driver.name "blazer_ser" 0.103141 Trying megatec protocol... 0.103687 send: 'Q1' 1.105456 read: timeout 1.105823 blazer_status: short reply 1.106058 Status read 1 failed 1.106825 send: 'Q1' 2.108171 read: timeout 2.108295 blazer_status: short reply 2.108338 Status read 2 failed 2.108638 send: 'Q1' 3.109987 read: timeout 3.110242 blazer_status: short reply 3.110349 Status read 3 failed 3.110509 Trying mustek protocol... 3.111206 send: 'QS' 4.112808 read: timeout 4.113098 blazer_status: short reply 4.113206 Status read 1 failed 4.113868 send: 'QS' 5.115398 read: timeout 5.115631 blazer_status: short reply 5.115736 Status read 2 failed 5.116453 send: 'QS' 6.117979 read: timeout 6.118322 blazer_status: short reply 6.118510 Status read 3 failed 6.118690 Trying megatec/old protocol... 6.119361 send: 'D' 7.120701 read: timeout 7.120934 blazer_status: short reply 7.121038 Status read 1 failed 7.121725 send: 'D' 8.123137 read: timeout 8.123400 blazer_status: short reply 8.123503 Status read 2 failed 8.124140 send: 'D' 9.125620 read: timeout 9.125659 blazer_status: short reply 9.125670 Status read 3 failed 9.125680 Trying zinto protocol... 9.126280 send: 'Q1' 10.127596 read: timeout 10.127641 blazer_status: short reply 10.127653 Status read 1 failed 10.128204 send: 'Q1' 11.129560 read: timeout 11.129596 blazer_status: short reply 11.129608 Status read 2 failed 11.130162 send: 'Q1' 12.131519 read: timeout 12.131556 blazer_status: short reply 12.131568 Status read 3 failed 12.131578 No supported UPS detected for ./nutdrv_qx -DDDDD -a infosec 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyS1" 0.000472 debug level is '5' 0.004317 upsdrv_initups... 0.106821 send: 'QGS' 1.108364 read: timeout (0) 1.108647 qx_process_answer: short reply (input.voltage) 1.109384 send: 'QGS' 2.110945 read: timeout (0) 2.111125 qx_process_answer: short reply (input.voltage) 2.111446 send: 'QGS' 3.112802 read: timeout (0) 3.113027 qx_process_answer: short reply (input.voltage) 3.113659 send: 'M' 4.115052 read: timeout (0) 4.115296 qx_process_answer: short reply (ups.firmware.aux) 4.115916 send: 'M' 5.117221 read: timeout (0) 5.117454 qx_process_answer: short reply (ups.firmware.aux) 5.118082 send: 'M' 6.119436 read: timeout (0) 6.119483 qx_process_answer: short reply (ups.firmware.aux) 6.120102 send: 'M' 7.121221 read: timeout (0) 7.121267 qx_process_answer: short reply (ups.firmware.aux) 7.121534 send: 'M' 8.121940 read: timeout (0) 8.122012 qx_process_answer: short reply (ups.firmware.aux) 8.122584 send: 'M' 9.123768 read: timeout (0) 9.123808 qx_process_answer: short reply (ups.firmware.aux) 9.124381 send: 'QS' 10.125458 read: timeout (0) 10.125510 qx_process_answer: short reply (input.voltage) 10.125784 send: 'QS' 11.127225 read: timeout (0) 11.127248 qx_process_answer: short reply (input.voltage) 11.127516 send: 'QS' 12.128803 read: timeout (0) 12.128839 qx_process_answer: short reply (input.voltage) 12.129325 send: 'D' 13.130616 read: timeout (0) 13.130732 qx_process_answer: short reply (input.voltage) 13.131177 send: 'D' 14.132452 read: timeout (0) 14.132491 qx_process_answer: short reply (input.voltage) 14.133038 send: 'D' 15.134371 read: timeout (0) 15.134413 qx_process_answer: short reply (input.voltage) 15.134985 send: 'Q1' 16.136148 read: timeout (0) 16.136233 qx_process_answer: short reply (input.voltage) 16.136781 send: 'Q1' 17.138132 read: timeout (0) 17.138157 qx_process_answer: short reply (input.voltage) 17.138472 send: 'Q1' 18.139762 read: timeout (0) 18.139800 qx_process_answer: short reply (input.voltage) 18.140562 send: 'Q1' 19.141915 read: timeout (0) 19.142021 qx_process_answer: short reply (input.voltage) 19.142575 send: 'Q1' 20.143857 read: timeout (0) 20.143895 qx_process_answer: short reply (input.voltage) 20.144443 send: 'Q1' 21.145828 read: timeout (0) 21.145869 qx_process_answer: short reply (input.voltage) 21.146458 send: 'Q1' 22.147803 read: timeout (0) 22.147886 qx_process_answer: short reply (input.voltage) 22.148437 send: 'Q1' 23.149876 read: timeout (0) 23.149917 qx_process_answer: short reply (input.voltage) 23.150486 send: 'Q1' 24.151597 read: timeout (0) 24.151635 qx_process_answer: short reply (input.voltage) 24.152194 send: 'Q1' 25.153359 read: timeout (0) 25.153420 qx_process_answer: short reply (input.voltage) 25.153810 send: 'Q1' 26.155268 read: timeout (0) 26.155306 qx_process_answer: short reply (input.voltage) 26.155872 send: 'Q1' 27.157368 read: timeout (0) 27.157405 qx_process_answer: short reply (input.voltage) 27.158010 send: 'Q1' 28.159325 read: timeout (0) 28.159404 qx_process_answer: short reply (input.voltage) 28.159950 send: 'Q1' 29.161389 read: timeout (0) 29.161413 qx_process_answer: short reply (input.voltage) 29.161734 send: 'Q1' 30.163172 read: timeout (0) 30.163194 qx_process_answer: short reply (input.voltage) 30.163200 Device not supported! 30.163204 Device not supported! Best regards, Robert SZAKSZ ----- Original Message ----- From: "Charles Lepple" <[email protected]> To: "Róbert SZAKSZ" <[email protected]> Cc: [email protected] Sent: Friday, November 20, 2015 1:39:17 PM Subject: Re: [Nut-upsuser] Contact-closure UPS On Nov 19, 2015, at 12:04 PM, Róbert SZAKSZ <[email protected]> wrote: > output(nutdrv_qx cmd upsdrvctl -DDD start) > > Network UPS Tools - UPS driver controller 2.7.3 > 0.000000 > If you're not a NUT core developer, chances are that you're told to enable > debugging > to see why a driver isn't working for you. We're sorry for the confusion, but > this is > the 'upsdrvctl' wrapper, not the driver you're interested in. > > Below you'll find one or more lines starting with 'exec:' followed by an > absolute > path to the driver binary and some command line option. This is what the > driver > starts and you need to copy and paste that line and append the debug flags to > that > line (less the 'exec:' prefix). > > 0.000665 Starting UPS: infosec > 0.000891 1 remaining attempts > 0.001135 exec: /usr/lib/ups/driver/nutdrv_qx -a infosec The above message is saying that the debug flags need to be added to the driver command line, not to the upsdrvctl command: /usr/lib/ups/driver/nutdrv_qx -DDD -a infosec -- Charles Lepple clepple@gmail _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
