Dear list,
since some days I own an APC Back-UPS BX1400U.
Now I try to connect my Raspberry Pi to it using NUT, but ... ;)
The UPS is connected via an USB-cable, and "lsusb" shows an APC device.
NUT is installed via "sudo apt-get install nut".
My goal: a Synology DiskStation DS1515+ should "read" UPS-data provided
from the Raspberry an shut-down itselt at 30% battery capacity.
The raspberry should shut-down at 20 %.
Is that UPS not supported?
Or does I have to use other settings?
If you need any additional information, please let me know and I'll (tyr
to) provide it!
Raspberry PI OS information:
torsten@raspberrypi:/ $ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
NAME="Raspbian GNU/Linux"
VERSION_ID="8"
VERSION="8 (jessie)"
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/";
SUPPORT_URL="http://www.raspbian.org/RaspbianForums";
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs";
torsten@raspberrypi:/ $
torsten@raspberrypi:/ $ lsusb
Bus 001 Device 004: ID 051d:0002 American Power Conversion
Uninterruptible Power Supply
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
torsten@raspberrypi:/ $
torsten@raspberrypi:/ $ sudo upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.2
Network UPS Tools - Generic HID driver 0.38 (2.7.2)
USB communication driver 0.32
kill: No such process
Driver exited abnormally
torsten@raspberrypi:/ $
torsten@raspberrypi:/ $ sudo cat /etc/nut/ups.conf
maxretry = 1
[UPS]
driver = usbhid-ups
port = auto
desc = "APC Back-UPS 1400"
torsten@raspberrypi:/
torsten@raspberrypi:/ $ sudo cat /etc/nut/nut.conf
MODE=netserver
torsten@raspberrypi:/
Thanks a lot for your time!
Cheers,
Torsten
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
