On Jul 20, 2016, at 6:12 PM, Edgar Estrada <[email protected]> wrote: > Does anybody know if it's possible to monitor a Powercom EBk 500 (RS232)? the > trick is that I am using a raspberry pi, it does not have RS232 so I > connected a keyspan RS232 to USB adapter, but so far I can´t make this work.
That model isn't listed in our compatibility table: http://networkupstools.org/stable-hcl.html?manufacturer=Powercom However, there are at least two drivers which are compatible with other serial models: powercom and blazer_ser (nutdrv_qx might be, as well). Which driver did you use? If you are using Raspbian, you can stop the NUT service (sudo service nut-server stop) and run the driver manually in debug mode: /lib/nut/powercom -a <name-from-ups.conf> -DDDD The commands and paths will likely be different for other distributions, but you can find out the path by passing a few "-D" flags to "upsdrvctl start". [please use Reply-All to include the list - thanks!] -- Charles Lepple clepple@gmail _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
