Hello

i need your help regarding the following issue :

i have a hero touch ups from infosec. it is connected via USB to a raspberry pi 
3.
i’ve configure ups.conf file as below

[HERO]
       driver = blazer_usb
       vendorid = 0665
       productid = 5161

either with
       port = auto
or 
       port = /dev/hidraw0
or
      port = /dev/ttySo
   
the connection never works

i get the following log from command line :
sudo /lib/nut/blazer_usb -a HERO -DDD -u root
Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2)
   0.000000     debug level is '3'
   0.003947     Checking device (0665/5161) (001/116)
   0.016760     - VendorID: 0665
   0.017245     - ProductID: 5161
   0.017686     - Manufacturer: INNO TECH
   0.018127     - Product: USB to Serial
   0.018598     - Serial Number: unknown
   0.019086     - Bus: 001
   0.019540     Trying to match device
   0.020136     Device matches
   0.020655     failed to claim USB device: could not claim interface 0: Device 
or resource busy
   0.021625     detached kernel driver from USB device...
   0.022676     Trying megatec protocol...
   0.025291     send: Q1
   0.153928     read: N
   0.154751     blazer_status: short reply
   0.155441     Status read 1 failed
   0.156783     send: Q1
   0.286922     read: N
   0.287605     blazer_status: short reply
   0.288335     Status read 2 failed
   0.289796     send: Q1
   0.419969     read: N
   0.420052     blazer_status: short reply
   0.420081     Status read 3 failed
   0.420107     Trying mustek protocol...
   0.420818     send: QS
   1.654899     read: could not claim interface 0: Device or resource busy
   1.655782     blazer_status: short reply
   1.656445     Status read 1 failed
   1.657598     send: QS
   2.891901     read: could not claim interface 0: Device or resource busy
   2.892810     blazer_status: short reply
   2.893497     Status read 2 failed
   2.894755     send: QS
   4.129250     read: could not claim interface 0: Device or resource busy
   4.129411     blazer_status: short reply
   4.129503     Status read 3 failed
   4.129590     Trying megatec/old protocol...
   4.130286     send: D
   4.254420     read: N
   4.254520     blazer_status: short reply
   4.254608     Status read 1 failed
   4.255296     send: D
   4.379452     read: N
   4.379601     blazer_status: short reply
   4.379692     Status read 2 failed
   4.380447     send: D
   4.504477     read: N
   4.504631     blazer_status: short reply
   4.504725     Status read 3 failed
   4.504812     Trying zinto protocol...
   4.505581     send: Q1
   4.635465     read: N
   4.635565     blazer_status: short reply
   4.635654     Status read 1 failed
   4.636344     send: Q1
   4.766481     read: N
   4.766580     blazer_status: short reply
   4.766668     Status read 2 failed
   4.767360     send: Q1
   4.897519     read: N
   4.897659     blazer_status: short reply
   4.897749     Status read 3 failed
   4.897835     No supported UPS detected
any idea ?
thanks a lot

_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Reply via email to