It seems that the UPS I bought is actually served by the blazer_usb driver.
USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875 http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS "The Eaton 5E is an essential line interactive UPS that provides cost effective and reliable power protection against power outages and bad power quality. Thanks to its small size the 5E can be installed easily in a business environment or at home." I can only assume that the usbhid-ups driver guesses the manufacturer as the first whole name in the data-strings if it doesn't reccognize it. Additional research in to the USB device ID lead to news articles from 2008(!) about Eaton aquiring Phoneixtek. I'm not sure if this is some UPS that's been sitting on a shelf for years or not . . . :( # cat >> /etc/udev/rules.d/99-nut.rules << "HEREDOC" SYSFS{idVendor}=="06da", SYSFS{idProduct}=="0003", MODE="664", GROUP="nut" HEREDOC # udevadm control --reload-rules I think I recall hearing systemd ate udev? # systemctl daemon-reload Then I disconnected/reconnected the UPS, since that was faster than looking up re-triggering udev rules. # cat >> /etc/ups/ups.conf << HEREDOC [eaton5e] driver = blazer_usb port = auto vendorid = 06da productid = 0003 HEREDOC I still need to perform the following calibrations: default.battery.voltage.high = value Maximum battery voltage that is reached after about 12 to 24 hours charging. If you want the driver to report a guesstimated battery.charge, you need to specify this (see BATTERY CHARGE). default.battery.voltage.low = value Minimum battery voltage just before the UPS automatically shuts down. If you want the driver to report a guesstimated battery.charge, you need to specify this (see BATTERY CHARGE). runtimecal = tShigh,pLhigh,tSmed,pLmed (timeSeconds and 'percent load' high/low) The first doesn't sound that difficult, it's mostly just waiting. The second and third values... THOSE are a lot more difficult with older incandescent light bulbs difficult to find. # echo Re-testing with the 'stable' version of NUT upsc eaton5e@localhost battery.charge: 100 battery.voltage: 27.40 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0003 driver.parameter.synchronous: no driver.parameter.vendorid: 06da driver.version: 2.7.4 driver.version.internal: 0.12 input.current.nominal: 18.0 input.frequency: 59.9 input.frequency.nominal: 60 input.voltage: 121.3 input.voltage.fault: 121.3 input.voltage.nominal: 120 output.voltage: 121.0 ups.beeper.status: enabled ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 0 ups.productid: 0003 ups.status: OL ups.type: offline / line interactive ups.vendorid: 06da # echo blazer_usb while powered ON ; a single older LCD monitor as load. battery.charge: 100 battery.voltage: 27.80 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0003 driver.parameter.synchronous: no driver.parameter.vendorid: 06da driver.version: 2.7.4-151-g9209e18 driver.version.internal: 0.12 input.current.nominal: 18.0 input.frequency: 59.9 input.frequency.nominal: 60 input.voltage: 121.3 input.voltage.fault: 121.0 input.voltage.nominal: 120 output.voltage: 121.3 ups.beeper.status: enabled ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 0 ups.productid: 0003 ups.status: OL ups.type: offline / line interactive ups.vendorid: 06da # echo blazer_usb while TURNED OFF # upsc eaton5e@localhost battery.charge: 100 battery.voltage: 26.30 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0003 driver.parameter.synchronous: no driver.parameter.vendorid: 06da driver.version: 2.7.4-151-g9209e18 driver.version.internal: 0.12 input.current.nominal: 18.0 input.frequency: 0.0 input.frequency.nominal: 60 input.voltage: 121.0 input.voltage.fault: 121.0 input.voltage.nominal: 120 output.voltage: 0.0 ups.alarm: Shutdown imminent! ups.beeper.status: enabled ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 0 ups.productid: 0003 ups.status: ALARM OL FSD ups.type: offline / line interactive ups.vendorid: 06da On Tue, Oct 25, 2016 at 10:45 AM Michael Evans <[email protected]> wrote: > I recently purchased a UPS from > http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS > > It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS > > SKU: 147140 > Mfr Part #: 5E2200USB-LA > UPC: 743172064875 > > "The Eaton 5E is an essential line interactive UPS that provides cost > effective and reliable power protection against power outages and bad power > quality. Thanks to its small size the 5E can be installed easily in a > business environment or at home." > > Network UPS Tools upsc 2.7.4-151-g9209e18 > > The git development version was required to get any communication with the > UPS; however a number of surprises awaited me. > > upsc eaton5e@localhost > device.mfr: CTN > device.model: USB UPS > device.type: ups > driver.name: usbhid-ups > driver.parameter.pollfreq: 30 > driver.parameter.pollinterval: 2 > driver.parameter.port: auto > driver.parameter.productid: 0003 > driver.parameter.synchronous: no > driver.parameter.vendorid: 06da > driver.version: 2.7.4-151-g9209e18 > driver.version.data: MGE HID 1.41 > driver.version.internal: 0.41 > ups.mfr: CTN > ups.model: USB UPS > ups.productid: 0003 > ups.status: OB > ups.vendorid: 06da > > The Manufacturer, model, and data presented are... not at all what I > expected. > > The particular model I selected has a 20A style plug. While I can plug it > in, I've no other devices with such a plug so I can't actually confirm it's > making proper contact. > > It would be nice if someone more aware of the state of the UPS industry > could comment on if this UPS is Eaton 'branded' as a result of some > licencing deal and/or merger; or if this UPS happens to be a counterfeit. > > I'd also like to know if I should be expecting to see things like the line > quality, UPS load, and maybe even a battery voltage (if not remaining time > estimate) from a 'lower end' UPS. > > > [3111733.168501] usb 3-3: USB disconnect, device number 6 > [3111737.564994] usb 3-3: new low-speed USB device number 7 using xhci_hcd > [3111737.763574] hid-generic 0003:06DA:0003.0002: hiddev0,hidraw0: USB HID > v1.11 Device [CTN USB UPS] on usb-0000:00:14.0-3/input0 > [3111737.921670] usb 3-4: new low-speed USB device number 8 using xhci_hcd > [3111738.085069] usb 3-4: device descriptor read/64, error -71 > [3111748.351251] usb 3-4: device descriptor read/64, error -110 > [3111748.614619] usb 3-4: new low-speed USB device number 9 using xhci_hcd > [3111748.777993] usb 3-4: device descriptor read/64, error -71 > [3111764.040752] usb 3-4: device descriptor read/64, error -110 > [3111764.304017] usb 3-4: new low-speed USB device number 10 using xhci_hcd > [3111764.305692] usb 3-4: Device not responding to setup address. > [3111764.508782] usb 3-4: Device not responding to setup address. > [3111764.710658] usb 3-4: device not accepting address 10, error -71 > [3111764.870704] usb 3-4: new low-speed USB device number 11 using xhci_hcd > [3111764.871490] usb 3-4: Device not responding to setup address. > [3111765.074047] usb 3-4: Device not responding to setup address. > [3111765.277350] usb 3-4: device not accepting address 11, error -71 > [3111765.278466] usb usb3-port4: unable to enumerate USB device > > Linux 4.7.4-1-ARCH #1 SMP PREEMPT Thu Sep 15 15:24:29 CEST 2016 x86_64 > GNU/Linux > > Bus 003 Device 006: ID 06da:0003 Phoenixtec Power Co., Ltd 1300VA UPS > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x06da Phoenixtec Power Co., Ltd > idProduct 0x0003 1300VA UPS > bcdDevice 5.01 > iManufacturer 3 > iProduct 1 > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 34 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 3 Human Interface Device > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.11 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 27 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 12 > >
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
