[please use reply-all to include the list - the headers are not mangled] On Oct 25, 2016, at 9:53 AM, Tomasz Przychodzień wrote: > > Hi, > > Another beginner question. I spend hours trying to find the solution for how > to configure winnut properly but I' struggling to make it work. I want my > QNAP NAS TS-231 to work as a master and send signal to the PC to shut it down > during power outage. I configured QNAP properly (like this: > http://geekbeat.tv/qnap-adding-external-devices-qnap), but I don't know what > to do next. > > I work on Win10, WinNUT-2.0.0.4a UPS: CYBERPOWER CP1500PFCLCD > I have no idea how to config monitoring. This part: MONITOR <system> > <powervalue> <username> <password> ("master"|"slave") > > I found somewhere that I should add a line: > MONITOR qnapups@<IP ADDRESS OF MY COMPUTER>:3493 1 admin 123456 slave > Does this help? http://www.snbforums.com/threads/using-qnap-ups-server-to-signal-other-devices.17551/
It mentions that you should use the Admin password for QNAP. Also, just to clarify, it sounds like <IP ADDRESS OF MY COMPUTER> should be the IP of the QNAS unit, not the computer running WinNUT. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
