I have a need to use NUTS on a Windows 2016 Server however as all the
resources are Linux orientated I am having serious issues getting things
to behave.
We have a serial Port COM4 attached to a Liebert GXT2-3000RT230 using
its dedicated cable.
It worked fine when we could use JAVA and the windows 'Multilink'
software which came with it.
Only MSI I could find in download section - Nut Build 5/3/2014 13:33 290kb
Because of potential file name issues it is installed in c:\UPS\NUT and
the .\etc files have been tweaked as follows:
NUT.EXE Run as a system service, NUT user has read access to everything.
Also put .\BIN and .\SBIN in path.
_*nut.conf*_
MODE=1
_*ups.conf*_
[UPS2]
driver = liebert-esp2
port = /dev/ttyS3
desc = "UPS No 2"
NUT as a service starts and stops immediately so I thought I'd try,
after much investigation, at lowest common denominator and see what the
Driver is reporting.
In an elevated CMD shell it says cannot find a /dev/ttyS3 so obviously
reading the ups.conf file and /dev/ttyS3 is the wrong thing to put there.
I don't know how else to translate the device name and I can't find any
documentation to help with the translation for windows.
Should the /driver = liebert-esp2/ actually read *driver = liebert-esp2.exe*
I can live with a UPS shutdown only system as the scheduled trigger is
to run a custom EXE i've created so we can do the majority of stuff
outside of NUT.*
*
*It would be nice to do battery tests etc but I doubt anyone will be
looking at this any time soon.*
Fellow NUTters, is there anyone out there with Windows experience and
this driver ?*
*
*MACE
*
*
*
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
