Some info:
* lsusb: Bus 005 Device 003: ID 0001:0000 Fry's Electronics * usb-devices: T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0001 ProdID=0000 Rev=01.00 S: Product=MEC0003 C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) * Test using nutdrv_qx -DDDDD in nutdrv_qx.log (attached). * Test using blazer_usb -DDDDD in blazer_usb.log (attached).* Capture of successful communications with the UPS using the application downloaded from the vendor's site in hunnox2.pcap (attached).
0.000000 debug level is '5' 0.002268 Checking device (1D6B/0001) (009/001) 0.002347 - VendorID: 1d6b 0.002357 - ProductID: 0001 0.002363 - Manufacturer: unknown 0.002369 - Product: unknown 0.002375 - Serial Number: unknown 0.002381 - Bus: 009 0.002386 - Device release number: 0409 0.002392 Trying to match device 0.002403 Device does not match - skipping 0.002416 Checking device (1D6B/0001) (008/001) 0.002448 - VendorID: 1d6b 0.002455 - ProductID: 0001 0.002461 - Manufacturer: unknown 0.002467 - Product: unknown 0.002472 - Serial Number: unknown 0.002497 - Bus: 008 0.002505 - Device release number: 0409 0.002510 Trying to match device 0.002519 Device does not match - skipping 0.002529 Checking device (1D6B/0001) (007/001) 0.002557 - VendorID: 1d6b 0.002567 - ProductID: 0001 0.002573 - Manufacturer: unknown 0.002579 - Product: unknown 0.002584 - Serial Number: unknown 0.002590 - Bus: 007 0.002595 - Device release number: 0409 0.002601 Trying to match device 0.002608 Device does not match - skipping 0.002618 Checking device (06DA/0003) (006/002) 0.018168 - VendorID: 06da 0.018201 - ProductID: 0003 0.018208 - Manufacturer: CTN 0.018215 - Product: USB UPS 0.018221 - Serial Number: unknown 0.018227 - Bus: 006 0.018234 - Device release number: 0501 0.018239 Trying to match device 0.018292 Device does not match - skipping 0.018315 Checking device (1D6B/0001) (006/001) 0.018378 - VendorID: 1d6b 0.018386 - ProductID: 0001 0.018391 - Manufacturer: unknown 0.018397 - Product: unknown 0.018403 - Serial Number: unknown 0.018408 - Bus: 006 0.018414 - Device release number: 0409 0.018419 Trying to match device 0.018431 Device does not match - skipping 0.018443 Checking device (0001/0000) (005/003) 0.021123 - VendorID: 0001 0.021150 - ProductID: 0000 0.021157 - Manufacturer: unknown 0.021163 - Product: MEC0003 0.021169 - Serial Number: unknown 0.021175 - Bus: 005 0.021183 - Device release number: 0100 0.021189 Trying to match device 0.021261 Device matches 0.021335 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) 0.021357 send_to_all: SETINFO ups.vendorid "0001" 0.021369 send_to_all: SETINFO ups.productid "0000" 0.021385 send_to_all: SETINFO device.type "ups" 0.021394 send_to_all: SETINFO driver.version "2.7.4" 0.021404 send_to_all: SETINFO driver.version.internal "0.12" 0.021424 send_to_all: SETINFO driver.name "blazer_usb" 0.021433 Trying megatec protocol... 0.021442 send: Q1 0.027112 received 47 (40) 0.027141 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.027163 send_to_all: SETINFO input.voltage "0.0" 0.027175 send_to_all: SETINFO input.voltage.fault "0.0" 0.027186 send_to_all: SETINFO output.voltage "0.0" 0.027249 send_to_all: SETINFO ups.load "0" 0.027260 send_to_all: SETINFO input.frequency "0.0" 0.027274 send_to_all: SETINFO battery.voltage "0.00" 0.027285 send_to_all: SETINFO ups.temperature "0.0" 0.027295 send_to_all: SETINFO ups.beeper.status "disabled" 0.027305 send_to_all: SETINFO ups.type "online" 0.027318 send_to_all: SETINFO ups.status "OL" 0.027325 Status read in 1 tries 0.027332 Supported UPS detected with megatec protocol 0.027340 send: F 0.032107 received 22 (35) 0.032125 read: #000.0 0.0 00.00 00.0 0.032136 send_to_all: SETINFO input.voltage.nominal "0" 0.032142 send_to_all: SETINFO input.current.nominal "0.0" 0.032148 send_to_all: SETINFO battery.voltage.nominal "0.0" 0.032154 send_to_all: SETINFO input.frequency.nominal "0" 0.032157 Ratings read in 1 tries 0.032162 send: I 0.038099 received 39 (35) 0.038106 read: # 0.038112 send_to_all: SETINFO ups.mfr "" 0.038117 send_to_all: SETINFO ups.model "" 0.038122 send_to_all: SETINFO ups.firmware "" 0.038125 Vendor information read in 1 tries 0.038128 No values provided for battery high/low voltages in ups.conf 0.038132 send_to_all: SETINFO battery.voltage.low "0.00" 0.038137 send_to_all: SETINFO battery.voltage.high "0.00" 0.038140 Using 'guestimation' (low: 0.000000, high: 0.000000)! 0.038143 Battery runtime will not be calculated (runtimecal not set) 0.038148 send_to_all: SETINFO ups.delay.start "180" 0.038152 send_to_all: SETINFO ups.delay.shutdown "30" 0.038155 send_to_all: ADDCMD beeper.toggle 0.038158 send_to_all: ADDCMD load.off 0.038161 send_to_all: ADDCMD load.on 0.038164 send_to_all: ADDCMD shutdown.return 0.038167 send_to_all: ADDCMD shutdown.stayoff 0.038170 send_to_all: ADDCMD shutdown.stop 0.038173 send_to_all: ADDCMD test.battery.start 0.038176 send_to_all: ADDCMD test.battery.start.deep 0.038179 send_to_all: ADDCMD test.battery.start.quick 0.038182 send_to_all: ADDCMD test.battery.stop 0.038186 send: Q1 0.044110 received 47 (40) 0.044132 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.044176 send_to_all: DATAOK 0.044272 dstate_init: sock /var/run/nut/blazer_usb-hunnox open on fd 5 0.044308 send_to_all: SETINFO driver.parameter.pollinterval "2" 0.044323 send_to_all: SETINFO driver.parameter.synchronous "no" 0.044336 send_to_all: SETINFO device.mfr "" 0.044350 send_to_all: SETINFO device.model "" 0.044362 send: Q1 0.050123 received 47 (40) 0.050154 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 2.046261 send: Q1 2.051130 received 47 (40) 2.051138 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 4.048154 send: Q1 4.053155 received 47 (40) 4.053166 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 6.050099 send: Q1 6.055193 received 47 (40) 6.055207 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 8.051980 send: Q1 8.057238 received 47 (40) 8.057269 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
hunnox2.pcap
Description: application/vnd.tcpdump.pcap
0.000000 debug level is '5' 0.001082 upsdrv_initups... 0.001479 Checking device (1D6B/0001) (009/001) 0.001500 - VendorID: 1d6b 0.001502 - ProductID: 0001 0.001504 - Manufacturer: unknown 0.001506 - Product: unknown 0.001508 - Serial Number: unknown 0.001509 - Bus: 009 0.001511 - Device release number: 0409 0.001513 Trying to match device 0.001517 Device does not match - skipping 0.001521 Checking device (1D6B/0001) (008/001) 0.001531 - VendorID: 1d6b 0.001533 - ProductID: 0001 0.001535 - Manufacturer: unknown 0.001536 - Product: unknown 0.001538 - Serial Number: unknown 0.001539 - Bus: 008 0.001541 - Device release number: 0409 0.001543 Trying to match device 0.001545 Device does not match - skipping 0.001548 Checking device (1D6B/0001) (007/001) 0.001556 - VendorID: 1d6b 0.001558 - ProductID: 0001 0.001560 - Manufacturer: unknown 0.001561 - Product: unknown 0.001563 - Serial Number: unknown 0.001565 - Bus: 007 0.001566 - Device release number: 0409 0.001568 Trying to match device 0.001570 Device does not match - skipping 0.001573 Checking device (06DA/0003) (006/002) 0.018774 - VendorID: 06da 0.018806 - ProductID: 0003 0.018813 - Manufacturer: CTN 0.018821 - Product: USB UPS 0.018827 - Serial Number: unknown 0.018832 - Bus: 006 0.018839 - Device release number: 0501 0.018844 Trying to match device 0.018890 Device does not match - skipping 0.018911 Checking device (1D6B/0001) (006/001) 0.018974 - VendorID: 1d6b 0.018981 - ProductID: 0001 0.018988 - Manufacturer: unknown 0.018993 - Product: unknown 0.018999 - Serial Number: unknown 0.019004 - Bus: 006 0.019009 - Device release number: 0409 0.019015 Trying to match device 0.019024 Device does not match - skipping 0.019041 Checking device (0001/0000) (005/003) 0.021719 - VendorID: 0001 0.021737 - ProductID: 0000 0.021743 - Manufacturer: unknown 0.021749 - Product: MEC0003 0.021754 - Serial Number: unknown 0.021759 - Bus: 005 0.021765 - Device release number: 0100 0.021770 Trying to match device 0.021831 Device matches 0.021889 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) 0.021912 send_to_all: SETINFO ups.vendorid "0001" 0.021926 send_to_all: SETINFO ups.productid "0000" 0.021964 send: QGS 0.021975 read: QGS 0.021985 qx_process_answer: short reply (input.voltage) 0.021994 send: QGS 0.022000 read: QGS 0.022008 qx_process_answer: short reply (input.voltage) 0.022017 send: QGS 0.022024 read: QGS 0.022031 qx_process_answer: short reply (input.voltage) 0.022038 send: M 0.022045 read: M 0.022053 voltronic_qs_protocol: invalid protocol [M] 0.022060 ups_infoval_set: failed to preprocess value [ups.firmware.aux: M] 0.022067 send: M 0.022073 read: M 0.022081 voltronic_qs_protocol: invalid protocol [M] 0.022091 ups_infoval_set: failed to preprocess value [ups.firmware.aux: M] 0.022098 send: M 0.022103 read: M 0.022112 voltronic_qs_protocol: invalid protocol [M] 0.022117 ups_infoval_set: failed to preprocess value [ups.firmware.aux: M] 0.022125 send: M 0.022130 read: M 0.022139 voltronic_qs_hex_protocol: invalid protocol [M] 0.022146 ups_infoval_set: failed to preprocess value [ups.firmware.aux: M] 0.022152 send: M 0.022158 read: M 0.022165 voltronic_qs_hex_protocol: invalid protocol [M] 0.022171 ups_infoval_set: failed to preprocess value [ups.firmware.aux: M] 0.022177 send: M 0.022182 read: M 0.022189 voltronic_qs_hex_protocol: invalid protocol [M] 0.022196 ups_infoval_set: failed to preprocess value [ups.firmware.aux: M] 0.022203 send: QS 0.022210 read: QS 0.022218 qx_process_answer: short reply (input.voltage) 0.022226 send: QS 0.022235 read: QS 0.022241 qx_process_answer: short reply (input.voltage) 0.022247 send: QS 0.022252 read: QS 0.022258 qx_process_answer: short reply (input.voltage) 0.022265 send: D 0.022270 read: D 0.022276 qx_process_answer: short reply (input.voltage) 0.022282 send: D 0.022288 read: D 0.022294 qx_process_answer: short reply (input.voltage) 0.022300 send: D 0.022305 read: D 0.022311 qx_process_answer: short reply (input.voltage) 0.022317 send: Q1 0.027727 received 47 (40) 0.027764 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.027785 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.027793 30 30 30 0d 0.027799 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.027822 send_to_all: SETINFO input.voltage "0.0" 0.027835 send: ID 0.027841 read: ID 0.027849 bestups_preprocess_id_answer: wrong length [device.model: 3] 0.027856 qx_process: failed to preprocess answer [device.model] 0.027891 send_to_all: DELINFO input.voltage 0.027895 send: Q1 0.033708 received 47 (40) 0.033726 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.033733 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.033739 30 30 30 0d 0.033742 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.033750 send_to_all: SETINFO input.voltage "0.0" 0.033755 send: ID 0.033758 read: ID 0.033761 bestups_preprocess_id_answer: wrong length [device.model: 3] 0.033763 qx_process: failed to preprocess answer [device.model] 0.033766 send_to_all: DELINFO input.voltage 0.033769 send: Q1 0.039708 received 47 (40) 0.039727 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.039735 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.039738 30 30 30 0d 0.039740 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.039752 send_to_all: SETINFO input.voltage "0.0" 0.039758 send: ID 0.039761 read: ID 0.039763 bestups_preprocess_id_answer: wrong length [device.model: 3] 0.039766 qx_process: failed to preprocess answer [device.model] 0.039770 send_to_all: DELINFO input.voltage 0.039773 send: Q1 0.045712 received 47 (40) 0.045725 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.045731 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.045733 30 30 30 0d 0.045735 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.045742 send_to_all: SETINFO input.voltage "0.0" 0.045746 send: QPI 0.045748 read: QPI 0.045750 qx_process_answer: short reply (ups.firmware.aux) 0.045753 send_to_all: DELINFO input.voltage 0.045755 send: Q1 0.051719 received 47 (40) 0.051753 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.051772 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.051784 30 30 30 0d 0.051796 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.051816 send_to_all: SETINFO input.voltage "0.0" 0.051827 send: QPI 0.051834 read: QPI 0.051841 qx_process_answer: short reply (ups.firmware.aux) 0.051851 send_to_all: DELINFO input.voltage 0.051858 send: Q1 0.057711 received 47 (40) 0.057730 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.057741 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.057744 30 30 30 0d 0.057747 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.057756 send_to_all: SETINFO input.voltage "0.0" 0.057760 send: QPI 0.057762 read: QPI 0.057765 qx_process_answer: short reply (ups.firmware.aux) 0.057768 send_to_all: DELINFO input.voltage 0.057772 send: Q1 0.063742 received 47 (40) 0.063786 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.063804 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.063812 30 30 30 0d 0.063818 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.063841 send_to_all: SETINFO input.voltage "0.0" 0.063860 send: I 0.069705 received 39 (35) 0.069719 read: (39 bytes) => 23 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 0.069724 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 0d 0.069726 read: # 0.069731 ups_infoval_set: non significant value [ups.firmware] 0.069735 send_to_all: DELINFO input.voltage 0.069737 send: Q1 0.075709 received 47 (40) 0.075729 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.075735 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.075738 30 30 30 0d 0.075740 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.075750 send_to_all: SETINFO input.voltage "0.0" 0.075760 send: I 0.081697 received 39 (35) 0.081706 read: (39 bytes) => 23 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 0.081711 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 0d 0.081713 read: # 0.081717 ups_infoval_set: non significant value [ups.firmware] 0.081720 send_to_all: DELINFO input.voltage 0.081723 send: Q1 0.087703 received 47 (40) 0.087716 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.087723 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.087726 30 30 30 0d 0.087728 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.087735 send_to_all: SETINFO input.voltage "0.0" 0.087741 send: I 0.093719 received 39 (35) 0.093736 read: (39 bytes) => 23 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 0.093743 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 0d 0.093745 read: # 0.093750 ups_infoval_set: non significant value [ups.firmware] 0.093755 send_to_all: DELINFO input.voltage 0.093758 send: Q1 0.099715 received 47 (40) 0.099754 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.099773 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.099785 30 30 30 0d 0.099792 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.099814 send_to_all: SETINFO input.voltage "0.0" 0.099837 send: FW? 0.099847 read: FW? 0.099855 qx_process_answer: short reply (ups.firmware) 0.099871 send_to_all: DELINFO input.voltage 0.099880 send: Q1 0.105712 received 47 (40) 0.105741 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.105763 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.105774 30 30 30 0d 0.105782 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.105799 send_to_all: SETINFO input.voltage "0.0" 0.105820 send: FW? 0.105827 read: FW? 0.105834 qx_process_answer: short reply (ups.firmware) 0.105841 send_to_all: DELINFO input.voltage 0.105848 send: Q1 0.111706 received 47 (40) 0.111734 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.111753 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.111763 30 30 30 0d 0.111769 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.111784 send_to_all: SETINFO input.voltage "0.0" 0.111800 send: FW? 0.111809 read: FW? 0.111815 qx_process_answer: short reply (ups.firmware) 0.111822 send_to_all: DELINFO input.voltage 0.111830 send: Q1 0.117712 received 47 (40) 0.117740 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.117758 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.117769 30 30 30 0d 0.117775 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.117792 send_to_all: SETINFO input.voltage "0.0" 0.117802 Using protocol: Q1 0.07 0.117819 send_to_all: SETINFO device.type "ups" 0.117841 send_to_all: SETINFO driver.version "2.7.4" 0.117853 send_to_all: SETINFO driver.version.internal "0.28" 0.117862 send_to_all: SETINFO driver.name "nutdrv_qx" 0.117868 upsdrv_initinfo... 0.117880 send_to_all: SETINFO driver.version.data "Q1 0.07" 0.117890 send: Q1 0.123707 received 47 (40) 0.123733 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.123755 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.123763 30 30 30 0d 0.123768 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.123785 send_to_all: SETINFO input.voltage.fault "0.0" 0.123814 send_to_all: SETINFO output.voltage "0.0" 0.123835 send_to_all: SETINFO ups.load "0" 0.123850 send_to_all: SETINFO input.frequency "0.0" 0.123865 send_to_all: SETINFO battery.voltage "0.00" 0.123898 send_to_all: SETINFO ups.temperature "0.0" 0.123911 update_status: OL 0.123920 update_status: !LB 0.123944 send_to_all: SETINFO ups.type "online" 0.123959 update_status: !CAL 0.123969 update_status: !FSD 0.123984 send_to_all: SETINFO ups.beeper.status "disabled" 0.123997 send_to_all: ADDCMD beeper.toggle 0.124007 send_to_all: ADDCMD load.off 0.124017 send_to_all: ADDCMD load.on 0.124025 send_to_all: ADDCMD shutdown.return 0.124033 send_to_all: ADDCMD shutdown.stayoff 0.124041 send_to_all: ADDCMD shutdown.stop 0.124051 send_to_all: ADDCMD test.battery.start 0.124059 send_to_all: ADDCMD test.battery.start.deep 0.124068 send_to_all: ADDCMD test.battery.start.quick 0.124076 send_to_all: ADDCMD test.battery.stop 0.124089 send_to_all: SETINFO ups.delay.start "180" 0.124098 send_to_all: SETFLAGS ups.delay.start RW 0.124109 send_to_all: ADDRANGE ups.delay.start 0 599940 0.124120 send_to_all: SETINFO ups.delay.shutdown "30" 0.124128 send_to_all: SETFLAGS ups.delay.shutdown RW 0.124139 send_to_all: ADDRANGE ups.delay.shutdown 12 600 0.124153 Can't autodetect number of battery packs [-1/0.00] 0.124162 Battery runtime will not be calculated (runtimecal not set) 0.124182 send_to_all: SETINFO driver.parameter.pollfreq "30" 0.124189 upsdrv_updateinfo... 0.124195 Quick update... 0.124203 send: Q1 0.129702 received 47 (40) 0.129718 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.129726 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.129729 30 30 30 0d 0.129731 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.129736 update_status: OL 0.129740 update_status: !LB 0.129745 update_status: !CAL 0.129750 update_status: !FSD 0.129757 send_to_all: SETINFO ups.status "OL" 0.129764 send_to_all: DATAOK 0.129816 dstate_init: sock /var/run/nut/nutdrv_qx-hunnox open on fd 5 0.129824 send_to_all: SETINFO driver.parameter.pollinterval "2" 0.129827 send_to_all: SETINFO driver.parameter.synchronous "no" 0.129831 upsdrv_updateinfo... 0.129833 Quick update... 0.129837 send: Q1 0.135699 received 47 (40) 0.135709 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 0.135716 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 0.135720 30 30 30 0d 0.135722 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 0.135726 update_status: OL 0.135729 update_status: !LB 0.135734 update_status: !CAL 0.135738 update_status: !FSD 2.131787 upsdrv_updateinfo... 2.131807 Quick update... 2.131813 send: Q1 2.136776 received 47 (40) 2.136814 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 2.136833 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 2.136840 30 30 30 0d 2.136847 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 2.136863 update_status: OL 2.136873 update_status: !LB 2.136886 update_status: !CAL 2.136896 update_status: !FSD 4.133791 upsdrv_updateinfo... 4.133835 Quick update... 4.133848 send: Q1 4.138890 received 47 (40) 4.138925 read: (47 bytes) => 28 30 30 30 2e 30 20 30 30 30 2e 30 20 30 30 30 2e 30 4.138944 20 30 30 30 20 30 30 2e 30 20 30 2e 30 30 20 30 30 2e 30 20 30 30 30 30 30 4.138952 30 30 30 0d 4.138958 read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000 4.138970 update_status: OL 4.138981 update_status: !LB 4.138995 update_status: !CAL 4.139013 update_status: !FSD
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
