A Dynamic Capacity event can span multiple event records grouped
together by the CXL_DCD_EVENT_MORE flag. Extents are staged in the
pending list until the last event record ('More'=0) is received, at
which point the chain is processed. If the device opens such a chain
(More=1) but never sends the closing record, the staged list sits
indefinitely.

Add a delayed-work watchdog that drops the chain on timeout: an add
chain is refused with an empty Add Dynamic Capacity Response (4802h),
a release chain is left for the device to retry.

The spec sets no limit; 20s is a generous upper bound that may be
tightened later, and guards against a lost mailbox response or a
crashed fabric manager.

The deadline is fixed when the chain opens rather than extended per
record, so a device cannot keep a chain alive, and the staged list
growing, by streaming More=1 records.

Signed-off-by: Anisa Su <[email protected]>
Tested-by: Wonjae Lee <[email protected]>
Tested-by: Junhee Park <[email protected]>
Tested-by: Heesoo Kim <[email protected]>
---
 drivers/cxl/core/mbox.c | 84 +++++++++++++++++++++++++++++++++++++++++
 drivers/cxl/cxlmem.h    | 15 ++++++++
 2 files changed, 99 insertions(+)

diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index 3acf5ace48db..fea910e6c510 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -873,6 +873,8 @@ static const uuid_t log_uuid[] = {
        [VENDOR_DEBUG_UUID] = DEFINE_CXL_VENDOR_DEBUG_UUID,
 };
 
+static void cxl_cancel_dcd_chain_work(void *_mds);
+
 /**
  * cxl_enumerate_cmds() - Enumerate commands for a device.
  * @mds: The driver data for the operation
@@ -891,6 +893,16 @@ int cxl_enumerate_cmds(struct cxl_memdev_state *mds)
        struct cxl_mem_command *cmd;
        int i, rc;
 
+       /*
+        * The DC chain watchdog sends a mailbox command when it fires.  
Register
+        * its cancellation here, once the mailbox is usable, so devm runs it
+        * before the mailbox goes away: in cxl_pci the device registers were
+        * mapped before this point and are unmapped after the cancel.
+        */
+       rc = devm_add_action_or_reset(dev, cxl_cancel_dcd_chain_work, mds);
+       if (rc)
+               return rc;
+
        gsl = cxl_get_gsl(mds);
        if (IS_ERR(gsl))
                return PTR_ERR(gsl);
@@ -1198,6 +1210,14 @@ static void clear_pending_extents(void *_mds)
                delete_extent_node(pos);
 }
 
+/*
+ * Bound on how long the host will wait for a device to finish a
+ * multi-record DC event chain (More=1 ... More=0) before refusing the
+ * chain.  The spec sets no limit; 20s is a generous upper bound, the
+ * maximum GPF timeout.
+ */
+#define CXL_DC_CHAIN_TIMEOUT   (20 * HZ)
+
 static const char *cxl_dcd_evt_type_str(u8 type)
 {
        switch (type) {
@@ -1226,6 +1246,11 @@ static void cxl_dc_chain_abort(struct cxl_memdev_state 
*mds)
        struct cxl_dc_event_chain *chain = &mds->dc_chain;
        struct device *dev = mds->cxlds.dev;
 
+       lockdep_assert_held(&chain->lock);
+
+       chain->armed = false;
+       cancel_delayed_work(&chain->timeout_work);
+
        if (chain->event_type == DCD_ADD_CAPACITY &&
            cxl_send_dc_response(mds, CXL_MBOX_OP_ADD_DC_RESPONSE,
                                 &chain->pending_extents, 0))
@@ -1234,6 +1259,43 @@ static void cxl_dc_chain_abort(struct cxl_memdev_state 
*mds)
        clear_pending_extents(mds);
 }
 
+static void cxl_dc_chain_timeout(struct work_struct *work)
+{
+       struct cxl_dc_event_chain *chain = container_of(to_delayed_work(work),
+                                                       struct 
cxl_dc_event_chain,
+                                                       timeout_work);
+       struct cxl_memdev_state *mds = container_of(chain,
+                                                   struct cxl_memdev_state,
+                                                   dc_chain);
+       struct device *dev = mds->cxlds.dev;
+
+       guard(mutex)(&chain->lock);
+
+       /*
+        * handle_dcd_chain_event() cancels this work non-synchronously (a sync
+        * cancel would deadlock on @chain->lock, which the chain-close path
+        * holds), so a callback that already started running can reach here
+        * after its chain has moved on.  Abort only if a chain is still armed
+        * AND the timer has not been re-armed since this expiry fired: a new
+        * chain's queue_delayed_work() makes delayed_work_pending() true,
+        * meaning this expiry belongs to a superseded deadline and must not
+        * abort the current chain.
+        */
+       if (!chain->armed || delayed_work_pending(&chain->timeout_work))
+               return;
+
+       dev_warn(dev, "DC %s chain timed out\n",
+                cxl_dcd_evt_type_str(chain->event_type));
+       cxl_dc_chain_abort(mds);
+}
+
+static void cxl_cancel_dcd_chain_work(void *_mds)
+{
+       struct cxl_memdev_state *mds = _mds;
+
+       cancel_delayed_work_sync(&mds->dc_chain.timeout_work);
+}
+
 static int stage_pending_extent(struct list_head *pending,
                                struct cxl_extent *to_add)
 {
@@ -1260,6 +1322,8 @@ static int handle_dcd_chain_event(struct cxl_memdev_state 
*mds,
        struct device *dev = mds->cxlds.dev;
        int rc;
 
+       guard(mutex)(&chain->lock);
+
        /* Chained records share one event type (CXL r4.0 Table 8-229) */
        if (list_empty(&chain->pending_extents)) {
                chain->event_type = event->event_type;
@@ -1279,9 +1343,22 @@ static int handle_dcd_chain_event(struct 
cxl_memdev_state *mds,
 
        if (event->flags & CXL_DCD_EVENT_MORE) {
                dev_dbg(dev, "more bit set; delay processing of extent\n");
+               /* The deadline is fixed when the chain opens, not per record */
+               if (!chain->armed) {
+                       queue_delayed_work(system_wq, &chain->timeout_work,
+                                          CXL_DC_CHAIN_TIMEOUT);
+                       chain->armed = true;
+               }
                return 0;
        }
 
+       /*
+        * Chain is closing.  Disarm before flushing so a pending watchdog
+        * (queued but blocked on @chain->lock) sees !armed and bails out.
+        */
+       chain->armed = false;
+       cancel_delayed_work(&chain->timeout_work);
+
        /* Nothing is tracked yet: refuse every add, acknowledge every release 
*/
        if (event->event_type == DCD_ADD_CAPACITY)
                rc = cxl_send_dc_response(mds, CXL_MBOX_OP_ADD_DC_RESPONSE,
@@ -2021,7 +2098,14 @@ struct cxl_memdev_state *cxl_memdev_state_create(struct 
device *dev, u64 serial,
 
        mutex_init(&mds->event.log_lock);
        INIT_LIST_HEAD(&mds->dc_chain.pending_extents);
+       mutex_init(&mds->dc_chain.lock);
+       INIT_DELAYED_WORK(&mds->dc_chain.timeout_work, cxl_dc_chain_timeout);
 
+       /*
+        * The watchdog cancel is registered later, by cxl_enumerate_cmds(), so
+        * devm's reverse-order unwind cancels (and waits for) the watchdog
+        * before this list cleanup runs.
+        */
        rc = devm_add_action_or_reset(dev, clear_pending_extents, mds);
        if (rc)
                return ERR_PTR(rc);
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index c88de7cb65d1..52c936ec15a9 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -8,6 +8,8 @@
 #include <linux/uuid.h>
 #include <linux/node.h>
 #include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
 #include <cxl/event.h>
 #include <cxl/mailbox.h>
 #include "cxl.h"
@@ -431,6 +433,11 @@ static inline struct cxl_dev_state *mbox_to_cxlds(struct 
cxl_mailbox *cxl_mbox)
  * struct cxl_dc_event_chain - staged Dynamic Capacity event chain
  * @pending_extents: extents received so far; flushed when the chain
  *                  closes (More=0)
+ * @timeout_work: watchdog that fires if a chain is opened with
+ *               CXL_DCD_EVENT_MORE but the closing record never arrives
+ * @lock: serialises updates to the chain state against the watchdog
+ * @armed: set when a More=1 chain opens; cleared when the chain closes
+ *        (More=0), is aborted by cxl_dc_chain_abort(), or times out.
  * @event_type: DCD event type of the open chain (add or release)
  *
  * The records of one Dynamic Capacity operation can be chained by the
@@ -439,9 +446,17 @@ static inline struct cxl_dev_state *mbox_to_cxlds(struct 
cxl_mailbox *cxl_mbox)
  * chain is open at a time.  Both Add Capacity and Release Capacity chains
  * are staged here, @event_type says which.  Records are staged until
  * More=0, then the chain is processed and responded to as a whole.
+ *
+ * If a chain is opened (More=1) but the device never sends the closing
+ * record, the staged list would otherwise sit indefinitely.  @timeout_work
+ * is a defensive watchdog that drops such a chain: an add is refused with
+ * an empty response, a release is held for the device to retry.
  */
 struct cxl_dc_event_chain {
        struct list_head pending_extents;
+       struct delayed_work timeout_work;
+       struct mutex lock;      /* chain state, against the watchdog */
+       bool armed;
        u8 event_type;
 };
 
-- 
2.43.0


Reply via email to