Hi Gyan, Thank you for this information. I agree with your following statements.
"You can see some similarities between the two NVO3 overlays GENEVE and VXLAN-GPE both having the ability carry metadata and so would be perfect for DC environment to carry APN ID in the metadata field for the endpoint characteristics signaling to the network." Any concrete use cases that could potentially use APN ID with either VxLAN-GPE or GENEVE? I also copied NOV3. Hope experts could help here. Thank you! Best reards, Shuping -----Original Message----- From: Gyan Mishra [mailto:[email protected]] Sent: Monday, March 29, 2021 4:54 PM To: Pengshuping (Peng Shuping) <[email protected]> Cc: Linda Dunbar <[email protected]>; [email protected]; [email protected] Subject: Re: [Apn] should add the gap analysis for GENEVE (RFC8926) Hi Shuping This is in similar context to use of VXLAN-GPE to carry APN APP ID marking information https://datatracker.ietf.org/doc/html/draft-ietf-nvo3-vxlan-gpe-11 The capabilities of the VXLAN-GPE protocol can be extended by defining next protocol "shim" headers that are used to implement new data plane functions. For example, Group-Based Policy (GBP) or In- situ Operations, Administration, and Maintenance (IOAM) metadata functionalities can be added as specified in [I-D.lemon-vxlan-lisp-gpe-gbp <https://datatracker.ietf.org/doc/html/draft-ietf-nvo3-vxlan-gpe-11#ref-I-D.lemon-vxlan-lisp-gpe-gbp>] and [I-D.brockners-ippm-ioam-vxlan-gpe <https://datatracker.ietf.org/doc/html/draft-ietf-nvo3-vxlan-gpe-11#ref-I-D.brockners-ippm-ioam-vxlan-gpe>]. GENEVE https://tools.ietf.org/html/rfc8926 Work such as "VL2: A Scalable and Flexible Data Center Network" [VL2 <https://tools.ietf.org/html/rfc8926#ref-VL2>] and "NVO3 Data Plane Requirements" [NVO3-DATAPLANE <https://tools.ietf.org/html/rfc8926#ref-NVO3-DATAPLANE>] have described some of the properties that the data plane must have to support network virtualization. However, one additional defining requirement is the need to carry metadata (e.g., system state) along with the packet data; example use cases of metadata are noted below. The use of some metadata is certainly not a foreign concept -- nearly all protocols used for network virtualization have at least 24 bits of identifier space as a way to partition between tenants. This is often described as overcoming the limits of 12-bit VLANs; when seen in that context or any context where it is a true tenant identifier, 16 million possible entries is a large number. However, the reality is that the metadata is not exclusively used to identify tenants, and encoding other information quickly starts to crowd the space. In fact, when compared to the tags used to exchange metadata between line cards on a chassis switch, 24-bit identifiers start to look quite small. There are nearly endless uses for this metadata, ranging from storing input port identifiers for simple security policies to sending service-based context for advanced middlebox applications that terminate and re-encapsulate Geneve traffic. You can see some similarities between the two NVO3 overlays GENEVE and VXLAN-GPE both having the ability carry metadata and so would be perfect for DC environment to carry APN ID in the metadata field for the endpoint characteristics signaling to the network. Kind Regards Gyan On Tue, Mar 23, 2021 at 10:26 PM Pengshuping (Peng Shuping) < [email protected]> wrote: > Thank you, Linda! > > > > When we start exploring the solution using GENEVE, we would need to > know more about the use cases. Thank you for the information! > > > > BR, > > Shuping > > > > *From:* Linda Dunbar [mailto:[email protected]] > *Sent:* Tuesday, March 23, 2021 11:16 AM > *To:* Pengshuping (Peng Shuping) <[email protected]>; > [email protected]; [email protected] > *Subject:* RE: should add the gap analysis for GENEVE (RFC8926) > > > > Shuping, > > > > Here is one example: for 5G Edge Computing, the edge devices have > limited capacity. It can use GENEVE to carry information about the > characteristics of the App, such as Types, Edge device information, etc. > > Linda > > > > > > *From:* Pengshuping (Peng Shuping) <[email protected]> > *Sent:* Sunday, March 21, 2021 8:39 PM > *To:* Linda Dunbar <[email protected]>; > [email protected]; [email protected] > *Subject:* RE: should add the gap analysis for GENEVE (RFC8926) > > > > Hi Linda, > > > > I was wondering about the concrete usage scenarios since I am not > familiar with those with GENEVE. For example, in what scenario > carrying what information to do what? > > > > Any references on the IoT case you mentioned about? > > > > Thank you! > > > > Best regards, > > Shuping > > > > *From:* Linda Dunbar [mailto:[email protected] > <[email protected]>] > *Sent:* Saturday, March 20, 2021 11:31 AM > *To:* Pengshuping (Peng Shuping) <[email protected]>; > [email protected]; [email protected] > *Subject:* RE: should add the gap analysis for GENEVE (RFC8926) > > > > ShuPing, > > > > GENEVE is to carry metadata associated with the packet. Metadata can > be location information, compute information, service ID, App category, etc. _______________________________________________ nvo3 mailing list [email protected] https://www.ietf.org/mailman/listinfo/nvo3
